Cannot connect to computer on network

From: Thor Tellefsen (ttellefsen@cfl.rr.com)
Date: 10/30/02 

From: "Thor Tellefsen" <ttellefsen@cfl.rr.com>
Date: Tue, 29 Oct 2002 15:56:10 -0800

I have 2 computers. One is on a wireless set up and one
is direct connect. I use a hub and wire the cable modem
to the uplink of the hub and attatch the wireless gateway
to one port on the hub. The other computer goes from a
NIC to another port on the hub. Both connect to the
internet fine. However, the two computers cannot see each
other. I can ping the direct wire system. I cannot ping
the wireless system. I have gone throught the windows
newtwork troubleshooter and still cannot connect. Any
ideas?

Relevant Pages

  • Re: Wireless LAN
    ... It is a Linksys WRT54G Wireless ... Router (not a hub). ... Both computers access the internet successfully. ... Using the Network Setup Wizard on each, I've tried to define a Home Network ...
    (microsoft.public.windowsxp.network_web)
  • Music Bridge
    ... The wire I used to run back to my stereo was mono, ... Now enter wireless home networks and the "wireless music bridge". ... about confusing the computers if I'm on the net through my hard wired home ...
    (microsoft.public.windowsxp.hardware)
  • Re: How do I connect a network printer to my XP system?
    ... > There are TWO other computers on the network. ... > in a Linksys Wireless Hub, with the two other computers, both Win 2000 ... > connected into the hub via wire. ...
    (microsoft.public.windowsxp.general)
  • Re: Using a router as a simple hub
    ... act as hub and a wireless access point. ... Wireless is Linksys WRT54GC ... DHCP is turned ON for the wired router, ... all wired computers have static IP addresses ...
    (alt.internet.wireless)
  • Cannot connect to computer on network
    ... You probably need to run Internet Connection Sharing on ... one of the computers. ... One is on a wireless set up and one ... I use a hub and wire the cable modem ...
    (microsoft.public.windowsxp.security_admin)
Quantcast