NAS identifier is not present
we are trying to set up a network with a DC, IAS, IIS VPN and an external
client when we try and connect to the internal network from the client we
receive an error message on the IAS sayi g the NAS identifier is not present
can anybody help please running out of time
.
Relevant Pages
- Re: Aironet 1200/Radius Help Needed
... I just fired up a W2003 Advanced Server so that I can take ... > IAS servers (do I need a separate certificate for the secondary IAS ... > of authentication since it involves just installing the certificate on ... between the AP and the client. ...
(microsoft.public.internet.radius) - Re: Aironet 1200/Radius Help Needed
... I just fired up a W2003 Advanced Server so that I can take ... >> IAS servers (do I need a separate certificate for the secondary IAS ... >> of authentication since it involves just installing the certificate on ... >between the AP and the client. ...
(microsoft.public.internet.radius) - Re: Securing Cisco devices using MS IAS (RADIUS) server
... Open up the MMC for the IAS service and connect to the server. ... Clients Container and select New | Client. ... Enter the IP Address of the RADIUS client and the ...
(microsoft.public.win2000.networking) - Re: IAS to authenticate CISCO VPN traffic
... I ran the netsh ras set tracing iassam enabled, ... in the ias log file i still see the normal log details as follows.. ... I created a client within IAS called ... >> Within this profile Under authentication and encryption I have tried ...
(microsoft.public.internet.radius) - Re: 802.1X/EAP authentication issue with XP client
... I also tried adjusting the IAS remote access policy framed MTU param ... client, same scenario, is not getting a successful authentication. ... or system event logs. ...
(microsoft.public.internet.radius) |
|
