Re: Servers in two Vlans
From: S. Pidgorny
Date: 10/27/05
- Next message: S. Pidgorny
: "Re: Digitally sign text files?" - Previous message: Eric Denekamp: "Re: Kerberos V5 Authentication for a Telnet Session"
- In reply to: chart_at_homesoc.com: "Servers in two Vlans"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Date: Thu, 27 Oct 2005 20:45:08 +1000
A good old Active Directory Replication Across Firewalls whitepaper
(http://www.microsoft.com/technet/prodtechnol/windows2000serv/technologies/a
ctivedirectory/deploy/confeat/adrepfir.mspx) is a good start for the
information. Refer to the "Limited RPC" section for a reasonable port list
achieved with a minimal registry tweak. As an absolute minimum you can
disable NetBIOS (requires Windows 2000 and up or Samba 3 clients) and not
use SSL protocols or WINS, which results in the following list of protocols:
* RPC endpoint mapper - 135/tcp
* RPC static port for AD replication - <fixed-port-of your-choice>/tcp
* SMB over IP (Microsoft-DS) - 445/tcp
* LDAP - 389/tcp, 389/udp (the latter for LDAP ping)
* Global catalog LDAP - 3268/tcp
* Kerberos - 88/udp
* DNS 53/tcp, 53/udp
Plus, you need to be able to ping the DC from the workstation. Leaving ping
open is generally not a bad idea anyway.
-- Svyatoslav Pidgorny, MS MVP - Security, MCSE -= F1 is the key =- <chart@homesoc.com> wrote in message news:1130338832.217307.167640@g43g2000cwa.googlegroups.com... > Question #1 > I have a domain forest in my current WAN. I have been asked to tighen > up security but implementing ACL's between VLAN's. My problem is this. > I have say office A on VlanA with the main controller and office B on > VlanB with a child controller. What ports am i going to have to open > up between those vlans so the two servers can talk to each other and > keep active directory happy. > > Question #2 > Would I need to open the same ports say if a workstation was on a > different Vlan then the server it authenticates with. Not sure this > would happen but just wanted to know in the event I run into that. > > I have all offices connected via Point to Point T1, switches are all > Cisco 3550's and all servers are compaq DL series of one flavor or > another. > > the goal is to open only the ports needed to have the server talk to > each other and keep Active Directory working, allow clients to > authenticate and all that other sever functions and block everything > else >
- Next message: S. Pidgorny
: "Re: Digitally sign text files?" - Previous message: Eric Denekamp: "Re: Kerberos V5 Authentication for a Telnet Session"
- In reply to: chart_at_homesoc.com: "Servers in two Vlans"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Relevant Pages
|
|
