Re: what the?? 2K3SP1

From: tophre (tophre_at_nospam.yahoo.com)
Date: 06/24/05 

Date: Fri, 24 Jun 2005 10:25:55 -0700

I thought about that too, and will give it a shot. Too bad you can't manage
it via one setting though.
Thanks for the reply.
Chris

"Steven L Umbach" <n9rou@nospam-comcast.net> wrote in message
news:O2md45NeFHA.3376@TK2MSFTNGP10.phx.gbl...
> Take a look at Windows Firewall:Define port exceptions under domain
> profile. You can add a string that will define the port exceptions and
> scope and they show an example of how to do such. Turning on the
> exception for file and print sharing should work but it sounds like you
> may want more granular control over available ports. The link below may
> also help. --- Steve
>
> http://www.microsoft.com/technet/security/smallbusiness/prodtech/windowsxp/fwgrppol.mspx
>
> "tophre" <tophre@nospam.yahoo.com> wrote in message
> news:e2i8FMNeFHA.2288@TK2MSFTNGP14.phx.gbl...
>> Steve,
>> I figured it out, it's port 445 on the clients. Do you know of a way via
>> GPO to modify the scope of a port? I know that I can turn on file and
>> print sharing in the firewall via GPO, but I can't find any documentation
>> as to how to modify the scope.
>> thanks for replying
>> Chris
>>
>>
>> "Steven L Umbach" <n9rou@nospam-comcast.net> wrote in message
>> news:uyHIWXHeFHA.1684@TK2MSFTNGP09.phx.gbl...
>>> What happens - any error message?? Verify that you can ping the
>>> computers in the remote subnets by name and IP address and try using
>>> \\xxx.xxx.xxx.xxx\C$ where xxx.xxx.xxx.xxx is the IP address of the
>>> computer you want to access. If the Windows Firewall is enabled on the
>>> remote computers check that their exception list includes all the
>>> pertinent subnets and check the Windows Firewall log for dropped
>>> traffic. You may first need to enable logging for the Windows
>>> rewall. --- Steve
>>>
>>>
>>> "tophre" <tophre@nospam.yahoo.com> wrote in message
>>> news:%23hMWf9CeFHA.720@TK2MSFTNGP15.phx.gbl...
>>>> Since installing SP1 I am no longer able to reach clients in remote
>>>> subnets from the local subnet. If I type \\machinename\C$ nothing,
>>>> however if I log on to a DC in a remote subnet, and type the same, I'm
>>>> instantly connected. Can anyone point me in the right direction as to
>>>> what may have happened?
>>>> Thanks
>>>> Chris
>>>>
>>>
>>>
>>
>>
>
>

Relevant Pages

  • Re: what the?? 2K3SP1
    ... Take a look at Windows Firewall:Define port exceptions under domain profile. ... You can add a string that will define the port exceptions and scope and they ...
    (microsoft.public.windows.server.security)
  • local module scopes and name spaces
    ... that I have a new scope and that this scope has 2 name spaces - the ... module's port name space because of the port ... module's module name space because of the net declarations? ... The connection can be unidirectional (either ...
    (comp.lang.verilog)
  • Re: biztalk lag time
    ... the send port to determine if a message was transmitted successfully. ... Put the send shape inside a scope ... Set the send port "delivery notification" property to "transmitted" ... If transmission fails, whatever you put in the exception handler will run. ...
    (microsoft.public.biztalk.general)
  • Re: Serial port
    ... >>the serial port. ... Why I cannot see on my scope the data signal if I put ... > Connect your scope ground to SIGNAL GROUND in the serial port ... select the setup options, and 'advanced', and set 'flow control', to ...
    (sci.electronics.design)
  • Connecting SCT to desktop
    ... It houses a Schmidt-Cassegrain telescope with a wedge and permanent mount. ... the scope connected to a laptop using the serial port to run the scope and the parallel port for the web cam. ...
    (sci.astro.amateur)