Re: Need some help quickly Please(Crossposted)

From: Peter Foldes (okf22_at_email.msn.com)
Date: 05/19/05 

Date: Thu, 19 May 2005 13:26:13 -0400

Thanks Robert. Spent about 3 hrs to find the problem. It was his install of the
Intell graphics driver that was not meant for his system.Some how SP1 brought out
the issue.
Thank you for answering me and I also feel the same way as you as you see from my
Sig 

-- 
Peter
Please Reply to Newsgroup for the benefit of others
Email  is Disabled
"Robert L [MS-MVP]" <noreply@hotmail.com> wrote in message
news:uN5JMGCXFHA.2348@TK2MSFTNGP14.phx.gbl...
I would check hardware first.
For more and other information, go to http://howtonetworking.com.
Don't send e-mail or reply to me except you need consulting services. Posting on MS
newsgroup will benefit all readers and you may get more help.
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
  "pdf" <pdf.msn@email.msn.com> wrote in message
news:elGnCdBXFHA.1240@TK2MSFTNGP14.phx.gbl...
  Crossposted on account of a quick feedback.I have a morning deadline .Thank you
  After installing SP1 my clients system got into a continuous loop at boot up. It
gets to the Win2003 screen and then back and starts again. I am able to get into
safe mode. I do not want to remove SP1 to get to boot up because I would like to
find the answer to this issue. I have another 6 systems to put up and I need to have
the answer just in case I run in to the same on the other ones.
  -- 
  Peter
  Please post answers in newsgroup for the benefit of others.
  Email is disabled.

Relevant Pages

  • RE: Help several issues after SP1 upgrade
    ... Thank you for posting to the SBS Newsgroup. ... I understand that after you installed SP1 on ... Before you install SP1, did you change any settings on your Server? ...
    (microsoft.public.windows.server.sbs)
  • Re: Sharepoint services reinstall after SP1
    ... Error applying Outlook SP1 MSP file to AIP ... Make sure Microsoft Office Outlook 2003 is in the status of installed. ... I suggest you that post back to our Newsgroup. ... Cannot install SBS 2K3 Premium SP1 successfully. ...
    (microsoft.public.windows.server.sbs)
  • RE: No external services after SP1 install
    ... Thank you for posting to the SBS Newsgroup. ... Have you installed the SP1 and rerun the CEICW successfully? ... No external services after SP1 install ...
    (microsoft.public.windows.server.sbs)
  • RE: HELP RAID failure after sp1 install
    ... Microsoft CSS Online Newsgroup Support ... HELP RAID failure after sp1 install ...
    (microsoft.public.windows.server.sbs)
  • Re: Sharepoint services reinstall after SP1
    ... Issue occurred immediately after installing SBS 2K3 SP1. ... I suggest you that still follow the KB829114 to install the Windows ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
Quantcast