Nortell and w2k3

From: Keht (NoVirus_at_IHateScriptKiddies.com)
Date: 06/24/04 

Date: Thu, 24 Jun 2004 09:05:07 -0400

I need to allow IPSec pass-through on the firewall (SBS 2003 Server using
RRAS) for Nortel's VPN Contivity Client. I have selected IPSec/IPSec
Traversal in RRAS on the IP Routing/Nat Basic Firewall/Network
Connection/Properties/Service and Ports, however it still does not work.
I've tries opening up the ports manually and this does not work either. Any
ideas??

Relevant Pages

  • Re: ISA 2004 & SBS 2003
    ... I assume that ISA 2004 also has a Firewall Client. ... > NAT is configured through RRAS. ... > would know the wizards worked again if everything was configured correctly ...
    (microsoft.public.windows.server.sbs)
  • Re: RRAS - Works on internal network, not past DMZ
    ... > VPN Users would connect directly to the Public interface of the RRAS box. ... The Firewall would need some additional configuration if you ... On the network connections configuration of the RRAS box, ... but the 'multiple gateway' error message has me spooked. ...
    (microsoft.public.windows.server.networking)
  • Re: Unknown Network Attack
    ... disabled on a server using rras. ... Check your tcp/ip configuration to make ... IP to DHCP or changed the entries in tcp/ip such as IP address, dns server, ... >> firewall configurations for some firewalls. ...
    (microsoft.public.windows.server.networking)
  • RE: Static routes w/o RRAS
    ... Actually, I had already disabled RRAS, run the CEICW, then disabled the ... Windows firewall, re-enabled RRAS, and configured the static routes. ... we still can add static routes in RRAS on SBS 2003 R2 ...
    (microsoft.public.windows.server.sbs)
  • Re: Passive FTP on PPPoE connection
    ... get private but other times you got the public IP address from RRAS. ... > Since a couple of months I've been using IIS 6 as my FTP server on a PPPoE ... > firewall settings, so in those cases it worked like it should. ... > for the basic firewall and for NAT. ...
    (microsoft.public.inetserver.iis.ftp)