Dang! Does running netsh firewall show state show that the firewall is
disabled? If so try booting into Safe Mode with networking again to see if
that works which should disable the ipsec service if there is an ipsec
policy assigned to the computer that could also block access or other
startup service doing the same. If none of that works I would try resetting
tcp/ip as described in the KB article below. If that does not work I would
remove the computer from the domain and try again after using netsh firewall
show state show to verify that the firewall is disabled. If still a no go I
would probably try replacing the network adapter. I also assume the
computers you are trying to ping it from are on the same network with the
same subnet mask and otherwise an incorrect default gateway on one of the
computers involved can cause a problem like you describe. If you have a
crossover cable available try connecting another computer directly to your
computer with that crossover cable plugged into the network adapter of both
computers to act as a simple network. --- Steve
http://support.microsoft.com/default.aspx?scid=kb;en-us;299357
"Luchito" <luchitoguard-stuff1@xxxxxxxxx> wrote in message
news:1138805941.517582.324180@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Despite completely disabling the windows firewall I still cannot ping
> my system and my shares are still inaccessible from other systems.
> Currently there aren't any GPOs being applied so I'm not really sure
> what else to do.
>
.
Re: //Tosh is not accessible ... > Salut/Hi Malke,... >>aren't running a third-party firewall that you don't know about. ... Do a search for "computers on the network"... If it is enabled, try disabling it. ... (microsoft.public.windowsxp.basics)
Re: Cant See The Network ... There's no firewall on the new desktop system. ... the onboard NIC card and installed a D-Link network card...same results. ...computers can see this one, but this desktop cannot see any other computer. ... > belonging in the trusted zone (or temporarily disabling your firewall) to ... (alt.internet.wireless)
Re: MUST I disable ICS Firewall? ...Disabling and uninstalling any firewall is only needed if you are having ... you don't have to disable it in order for the network to work. ... the machines on the network. ... (microsoft.public.windowsxp.network_web)
Re: Network Security Issues between Win 2000 pro and XP Home ... Info on disabling or checking the XP ICF firewall: ... Windows 2000 does not come with a firewall.... > XP has a built in ICF firewall that also needs to be disabled. ... > the XP box or view network connections advanced.... (microsoft.public.win2000.security)
RE: can ping but not browse ... I have stopped the firewall.... # are safed from all (security) hazards. ... firewall/bastion host to the internet... # internet and to an internal network,... (Fedora)
