VPN tunnel question

From: Miha (miha.bernik_at_email.si)
Date: 11/05/05 

Date: Sat, 5 Nov 2005 09:43:28 +0100

Hello

In our company we need to establish a secure VPN channel with outside
company in other country. They had already configured a VPN server (running
on WinNT) and sent us the following information so we could configure a VPN
client to connect.

Authentication method: pre-share secret

Key-change for encryption domain: yes

IKE (phase 1):

Encryption algorithm AES-256

'Condensation' function SHA-1

Diffie Helman group: 1024 bit

>Agressive mode< no

Key lifetime for phase1 1440 min

IKE (phase 2):

Encryption algorithm AES-256

'Condensation' function SHA-1

>Perfect Forward Secrecy enabled< no

PFS DH group: 1024 bit

>IP compression< no

>IPSEC SA Lifetime< 3600 s

I'm pretty confused of the information we got from them, because as far as I
know this aren't settings that could normally be configure for a VPN client.

 Is this possible and how could be done or do we need to configure a
site-site VPN tunnel to achieve that kind of functionality.

I would be very thankful for all the information and tips how to do this

Thank you all in advance

Regards

Miha

Relevant Pages

  • Re: ISA2004 kills VPN outbound
    ... Can you please tell me some information about the remote VPN Server? ... Do you have firewall client installed? ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA2004 kills VPN outbound
    ... I have the same problem connecting to several different VPN servers. ... > it use a hardware router or a windows-based computer to be its VPN Server? ... > connection will fail in some cases when a hardware firewall resides in the ... > |> FW client and configure the client as a SecureNAT client. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN server (hardware) and VPN client (Software) - both with changing IP. Can it be?
    ... How many clients will be using the VPN functionality simultanesously? ... >to have VPN server as a hardware box and client could be software. ... >For server we have registered with dyndns.org, so we have constant dns name ... what VPN server box would you recommend to buy? ...
    (comp.security.firewalls)
  • Re: VPN Routing Problem
    ... to my company's LAN using Kerio Winroute Firewall 6 and the VPN server and client that comes with it. ... resolve to 172.16.200.0 range ip addresses. ...
    (alt.os.windows-xp)
  • Re: RAS/VPN routing on client?
    ... I've set up a VPN Server and Client, ... On the client side the router has internal address 192.168.178.1 ... the client is that all internet traffic is routed over the VPN, ...
    (microsoft.public.windowsxp.network_web)