Re: VPN Working but 0 traffic at log?!?

From: Steven L Umbach (n9rou_at_nospam-comcast.net)
Date: 07/03/05

  • Next message: Kim Noer: "Re: Kerberos' role in a 'std. setup' without bells & whistles" 
    Date: Sun, 3 Jul 2005 10:36:02 -0500

    I can't answer your question but I would not worry about it if everything is
    working fine. It is not unusual to find some head scratchers in the
    security/system/application logs. You have to wonder how the server could
    acknowledge that the user requested a disconnect if there was never any
    traffic that session unless it was for the idle period specified to initiate
    disconnect in the user VPN connectoid properties or via Remote Access Policy
    perhaps? --- Steve

    "Mike" <pepe@pepe.com> wrote in message
    news:3ipttcFm8lr0U1@individual.net...
    >I have on problem at my VPN log, i donīt konw if it is just one log problem
    > or there are some other problems hidden.
    >
    > I look it up at microsoft.com, google ... but get not
    > answer. I would apreciate very much any idea about this
    >
    > I have a win 2k VPN Server. This server is at Domain.
    >
    > I have no problem having VPN connections (PPTP) but if i look at VPN log
    > or
    > Event Viewer-Sistem-Remote Access for some user it says:
    >
    > "0 bytes send 0m bytes received"
    >
    > After been connected for 4 hours and done many things (= traffic)
    >
    > how can that be possible???
    >
    > Here is the event:
    >
    > Event Type: Information
    > Event Source: RemoteAccess
    > Event Category: None
    > Event ID: 20048
    > Date: 7/13/2004
    > Time: 5:06:02 PM
    > User: N/A
    > Computer: VPN
    > Description:
    > The user SECURITAS\pepe connected on port VPN3-127 on 07/13/2004 at
    > 05:05pm
    > and disconnected on 07/13/2004 at 09:06pm. The user was active for 4
    > hours
    > 0 minutes 32 seconds. 0 bytes were sent and 0 bytes were received. The
    > port
    > speed was 10000000. The reason for disconnecting was user request.
    >
    >
    >
    > Many thanks
    >
    >

  • Next message: Kim Noer: "Re: Kerberos' role in a 'std. setup' without bells & whistles"

    Relevant Pages

    • Re: Checkpoint Firewall-1 VPN 4.1 SP3 problems
      ... Standard question, what info are you seeing in the logs, VPN log in ... > I've just set up a VPN tunnel between our primary UK site and our Indian ... > Something must have changed because SecuRemote users now can't access our ... > the two UK networks and the network of the serial interfaces of our Cisco ...
      (comp.security.firewalls)
    • VPN Working but 0 traffic at log?!?
      ... I have on problem at my VPN log, i donīt konw if it is just one log problem ... I have a win 2k VPN Server. ... I have no problem having VPN connections but if i look at VPN log or ... The reason for disconnecting was user request. ...
      (microsoft.public.win2000.security)
    • VPN Working but 0 traffic at log?!?
      ... I have on problem at my VPN log, i don´t konw if it is just one log problem ... I have a win 2k VPN Server. ... I have no problem having VPN connections but if i look at VPN log or ...
      (microsoft.public.isa.vpn)
    • RE: VPN disconnect!
      ... I understand that the VPN connection to the SBS ... Microsoft CSS Online Newsgroup Support ... >Thread-Topic: VPN disconnect! ...
      (microsoft.public.windows.server.sbs)
    • Re: VPN disconnects after 3 - 6 minutes
      ... > VPN connection is disconnected after several minutesVPN connection is disconnected after several minutes. ... > corporate VPN running on a Compaq nc2400 dual core laptop. ... > disconnect because it does not reload and try to reconnect. ...
      (microsoft.public.windowsxp.work_remotely)
    • Quantcast