Re: ISA not loading new packet filters

From: Brian (Brian_at_discussions.microsoft.com)
Date: 10/07/04 

Date: Thu, 7 Oct 2004 10:27:03 -0700

I ran ICW once some time ago. I have one LAN NIC and one WAN NIC in the server.

All the current filters work. However, when I add a new filter, whether a
block or an allow, nothing changes in what is filtered.

"Marina Roos [SBS-MVP]" wrote:

> Hi Brian,
>
> microsoft.public.backoffice.smallbiz2000 is especially for SBS 2000. Have
> you run ICW and how many nics in your server? What kind of packet filter?
>
> --
> Regards,
>
> Marina
> Microsoft SBS-MVP
>
> "Brian" <Brian@discussions.microsoft.com> schreef in bericht
> news:F200F50A-603B-4C2B-BEBB-17E3F218E40B@microsoft.com...
> > Windows 2000 SBS. I add a new packet filter, start/stop Firewall & Web
> Proxy,
> > but there is no change in what is filtered/unfiltered.
>
>
>

Relevant Pages

  • Re: Connector for POP3 Mailboxes will not receive mail
    ... Your going to need a packet filter in ISA to allow outbound traffic on port ... Since you haven't run ICW, ... You may want to reboot the server after you create the filter. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Connector for POP3 Mailboxes will not receive mail
    ... I created the ISA filter as directed and everything is working ... Another problem was that after the first time I ran ICW, ... > You may want to reboot the server after you create the filter. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: VPN question
    ... what kind of filter for my traffic to pass thru the external interface. ... > For a native Microsoft solution this would work if the 2K box had two NICs ... > and you installed RRAS, with a filter to allow VPN traffic to ... >> my home network without any additional equipment. ...
    (microsoft.public.windows.server.general)
  • Re: VPN question
    ... what kind of filter for my traffic to pass thru the external interface. ... > For a native Microsoft solution this would work if the 2K box had two NICs ... > and you installed RRAS, with a filter to allow VPN traffic to ... >> my home network without any additional equipment. ...
    (microsoft.public.windows.server.setup)
  • Re: VPN question
    ... what kind of filter for my traffic to pass thru the external interface. ... > For a native Microsoft solution this would work if the 2K box had two NICs ... > and you installed RRAS, with a filter to allow VPN traffic to ... >> my home network without any additional equipment. ...
    (microsoft.public.windows.server.networking)