RE: Server does not find domain after reboot with dual NIC cards

From: Anton Federkiewicz (anonymous_at_discussions.microsoft.com)
Date: 07/12/04 

Date: Mon, 12 Jul 2004 11:23:58 -0700

Thanks,

Taking out the DG on the VLAN card did the trick!

>-----Original Message-----
>It sounds like a network misconfiguration since disabling
the card makes
>the problem go away.
>
>Without seeing your network configuration, it's hard to
say, but a couple
>possible causes come immediately to mind.
>Default Gateways: Make sure you only have 1 DG on 1
NIC. The VLAN card
>should not have a DG at all.
>Subnet configuation: Make sure that the subnet for each
network card is
>different. If they are in the same subnet, you could run
into problems.
>With both cards turned on after a reboot, do a "route -
print" to see where
>traffic is being directed for the IP subnet that your
DC's sit on.
>
>Chris Ard
>Security Support
>Microsoft Corporation
>
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>.
>

Relevant Pages

  • Re: ICS questions and confusion
    ... >>>It doesn't HAVE to be on a different subnet, ... but that requires that the ICS host become a bridge. ... >> ICS is a software based NAT router, and routers work best when the ... >> network already had the required address 192.168.0.1" is confusing. ...
    (microsoft.public.windowsxp.network_web)
  • Re: How to set my MAC address
    ... because the VLAN isolation fails between the wifi side and the wired ... ports that I started experimenting with the 2nd subnet feature. ... there is no option to isolate the wireless from the VLAN. ... give out the password of my own wifi network, ...
    (uk.comp.sys.mac)
  • Re: CIDR Explanation
    ... slash notation that's becoming more common. ... CIDR or Classless Internet Domain Routing is VERY similar to subnetting and is ... This two part address is built of a network address and a host address. ... TCP/IP Classes allow for a 'default' subnet mask to identify the network from ...
    (Security-Basics)
  • HACMP/ES 5.1 + IPAT with IP alias problems
    ... I will try to describe my configuration in more details, ... I have tried using various different network configurations, ... labels must be on a different subnet when the network is configured\n to ...
    (comp.unix.aix)
  • Re: Sites/subnets question
    ... the subnet, that's something way different.... ... > the Citrix Farm to use the applications that they need to get their work ... >> We have a distributed network with a domain controller at each office, ... >> logon process to the servers the client is authenticating with a slow ...
    (microsoft.public.win2000.active_directory)