Re: Traffic across PPTP/VPN connection on WIN 2000 ADV Server

From: Steven L Umbach (n9rou_at_nospam-comcast.net)
Date: 04/30/04


Date: Fri, 30 Apr 2004 00:45:35 GMT

Make sure you are pinging the right addresses as shown by the IP addresses issued in
the VPN connection in status details. The IP addresses shown for client and server
need to be different. Also check there is no firewall, ipsec filtering, or Remote
Access policy IP filtering blocking ICMP access to those addresses. Tracert can also
be helpful in showing where there is a bottleneck in a routed connection. --- Steve

"Patrick" <anonymous@discussions.microsoft.com> wrote in message
news:645301c42e32$0c1c99e0$a101280a@phx.gbl...
> I have created an PPTP connection from my Win2000 client
> (IP-A)to a Win2000 Adv Server (IP-B). The IP addresses of
> the tunnel endpoints are IP-C and IP-C. All addresses are
> on the same subnet, but I am unable to ping IP-B or IP-D
> (server side) from the client side. The opposite is true
> for the Server side, unable to ping IP-A and IP-C from the
> server. I am, however, able to ping a different subnet
> being routed through the Server. Shouldn't I be able to
> ping the Gateway (IP-B) from the client? I suspect a
> configuration problem with the Routing and Access on the
> Server. Any suggestions??
>
> Thanks,
>
> Pat



Relevant Pages

  • Re: .Net Scalability problem
    ... LoadRunner will peak out a server with a few virtual users. ... To get an idea of load, ... Fire off the test client and watch the number of ... > So I think that the MTC generate concurrent connection and per ...
    (microsoft.public.dotnet.framework.adonet)
  • Re: Connection lost at same time every hour (sometimes)
    ... After making the two following alterations on the server the problem seems ... After analyze your ipconfig on SBS and client, ... Then, other connection is good, ...
    (microsoft.public.windows.server.sbs)
  • Re: server disconnection - very often
    ... Reason of permanent popups is VMware server aplication on clients. ... Run CEICW to configure the network of SBS: ... Two network adapters - manual router connection to broadband ... Uninstall VMware on client. ...
    (microsoft.public.windows.server.sbs)
  • Re: Lan setup 2 nic
    ... The external nic only has TCP/IP enabled. ... Ipconfig of the server is looking good, but the client is still missing the ... > connection so we have a 2 nic with router setup now. ...
    (microsoft.public.windows.server.sbs)
  • Re: Regular disconnections from remote web workplace
    ... I can connect to office server and all office clients from home at all times ... be physically working right up until the connection is lost. ... If I enter http://companyip from a client I receive the login screen for the ... Click Services tab and select Hide All Microsoft Services and Disable ...
    (microsoft.public.windows.server.sbs)