Re: Server Security

From: Steven L Umbach (n9rou_at_attbi.com)
Date: 06/10/03 

Date: Mon, 09 Jun 2003 23:54:05 GMT

"Nesw.Blueyonder" <alias007@blueyonder.co.uk> wrote in message
news:aCYEa.10227$m7.4709@news-binary.blueyonder.co.uk...
> Hi all,
>
> I have a Win Advance Server with two LAN cards, 1 connected to a cable
> modem, the 2nd connected to a LAN. The LAN NIC is used to share the
internet
> using NAT over private 10.0.0.0 addresses.
> The first NIC (Cable) only has TCP/IP enabled (no file sharing or
Microsoft
> client) The server and all other machines have Zone Alarm Pro.
>
> Questions
> 1) Using NAT Can anyone attack or even see my LAN PC's on the private
> 10.0.0.0 network ?
>
> 2) Is my server safe and if not what else can I do to protect it without
> additional hardware?
>
> Hardware/Software Envolved,
> Win Adv Server (Server)
> Win Xp (Clients)
> Hub
> NICS
>
> Thanks in advance for you help.
>
> Braindead.
>
>

Relevant Pages

  • Network Admin-Myrtle Beach, SC
    ... SofTec I.T. has a terrific permanent opportunity with a premier client ... for a Senior Network Administrator. ... Configures and maintains the organizations LAN server and LAN ...
    (comp.dcom.sys.cisco)
  • Re: Cant browse the network over VPN?!
    ... running WINS on the LAN, WINS will have an entry for the Domain Master ... If the client has the correct WINS address, ... > server, and you attempt to connect to a computer using a PPTP/VPN client, ... > opening Network Knighthood. ...
    (microsoft.public.windows.server.networking)
  • XP VPN - Force nslookup to use DNS servers supplied by RRAS?
    ... client connecting to office LAN via Windows VPN connection, ... the client will attempt to connect to a server on the LAN by ... who frequently use the Windows VPN connection to ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Multihomed IP Addressing for RRAS VPN
    ... You use two NICs if the server has a direct connection to the public ... the private LAN through VPN. ... If the server is on a private LAN, the router is your public gateway ...
    (microsoft.public.windows.server.networking)
  • Re: SBS 2003 R2 Install
    ... so what I'd planned was to set up the new sbs box exactly the same ... each client, then log off each client, then just remove the old sbs box ... the lan and replace it with the new box. ... 2003 server setup, ensure it is named exactly the same as your original ...
    (microsoft.public.windows.server.sbs)