IPSEC on two different NIC's

From: johnny_b_good (johnbgood@happy.org)
Date: 11/04/02 

From: "johnny_b_good" <johnbgood@happy.org>
Date: Mon, 4 Nov 2002 11:37:55 -0800

Hi all,

Quick question: Can I set up a W2K Server to have IPSEC
enabled on one physical NIC, but without IPSEC enabled on
the second physical NIC? So that I might have one NIC
pointing inside to our LAN with IPSEC and one NIC pointing
outside at the Internet with no IPSEC / plain old TCP/IP?
If yes, please advise how or point me to the appropriate
resource.

Thanks in advance,

Johnny

Relevant Pages

  • Re: IPSEC on two different NICs
    ... You can't specify the NIC exactly - you have to configure the IPSec ... will fire before the any port block rule. ... > pointing inside to our LAN with IPSEC and one NIC pointing ...
    (microsoft.public.win2000.security)
  • Re: L2TP/IPSec Verbindung läuft mit XP SP2 nicht mehr
    ... In XPSP2 the IPsec driver needs a registry setting when either the ... server or workstation are behind a NAT gateway. ... 1- Client initiates to a server that is behind the NAT ... > Peer Private Addr ...
    (microsoft.public.de.german.windowsxp.networking)
  • Re: Should I install Certificate Authority to solve these problems ?
    ... You can use IPsec with or without certs from your PKI. ... negotiations to your AD machines or those trusting the ... > In the item 1 below, the tool in use is a HP server management tool (type ... >>> Management is pushing to get Certificate Authority ...
    (microsoft.public.win2000.security)
  • Re: SP1 install and win2k3 server 2003
    ... server what other programs/drivers are loaded if AV was or not installed on ... I'm not going to install SP1 again until I know what went wong, ... IpSec are not blocking the system connetivity. ...
    (microsoft.public.windows.server.general)
  • Re: Unexpected shutdown
    ... - HP NC7761 Gigabit Server: ... - The IPSec Driver is starting in Bypass mode. ... - The Exchange IFS driver loaded successfully. ... Is anything scheduled at that time within scheduler? ...
    (microsoft.public.windows.server.general)