Re: ICS & DNS

From: Kaushal Shah (cryskns1@yahoo.com)
Date: 06/02/02 

From: "Kaushal Shah" <cryskns1@yahoo.com>
Date: Sun, 2 Jun 2002 10:42:29 -0700

Also tom, where did you get this help from. It does not match with the Win2k
Interface. For e.g. there is no network tasks in network connections.

Thanks, Kaushal

"Tom Helms" <helmstl@hotmail.com> wrote in message
news:uaKEwolCCHA.2296@tkmsftngp05...
> From Help:
> To enable Internet Connection Sharing on a network connection
>
> 1.. Open Network Connections.
> 2.. Click the dial-up, local area network, PPPoE, or VPN connection you
> want to share, and then, under Network Tasks, click Change settings of
this
> connection.
> 3.. On the Advanced tab, select the Allow other network users to connect
> through this computer's Internet connection check box.
> 4.. If you want this connection to dial automatically when another
> computer on your home or small office network attempts to access external
> resources, select the Establish a dial-up connection whenever a computer
on
> my network attempts to access the Internet check box.
> 5.. If you want other network users to enable or disable the shared
> Internet connection, select the Allow other network users to control or
> disable the shared Internet connection check box.
> 6.. Under Internet Connection Sharing, in Home networking connection,
> select any adapter that connects the computer sharing its Internet
> connection to the other computers on your network.
> Important
>
> a.. You should not use this feature in a network with other domain
> controllers, DNS servers, gateways, DHCP servers, or systems configured
for
> static IP.
> b.. When you enable Internet Connection Sharing, the network adapter
> connected to the home or small office network is given a new static IP
> address configuration. Existing TCP/IP connections on the Internet
> Connection Sharing computer are lost and need to be reestablished. For
> example, if Internet Explorer is connecting to a Web site when Internet
> Connection Sharing is enabled, refresh the browser to reestablish the
> connection.
> c.. To use the Internet Connection Sharing feature, users on your home
or
> small office network should configure TCP/IP on their local area
connection
> to obtain an IP address automatically. Home or small office network users
> must also configure Internet options for Internet Connection Sharing.
> Notes
>
> a.. To open Network Connections, click Start, click Control Panel, and
> then double-click Network Connections.
> b.. You must be logged on as an administrator or a member of the
> Administrators group in order to complete this procedure. If your computer
> is connected to a network, network policy settings may also prevent you
from
> completing this procedure.
> c.. Internet Connection Sharing and Internet Connection Firewall cannot
be
> enabled on incoming connections.
> d.. For information about the protocols, services, interfaces, and
routes
> that are automatically configured, click Related Topics.
> e.. To enable Internet Connection Sharing (ICS) Discovery and Control on
> Windows 98, Windows 98 Second Edition, and Windows Millennium Edition
> computers, run the Network Setup Wizard from the CD or floppy disk on
these
> computers. For more information about the Network Setup Wizard, click
> Related Topics.
> f.. For ICS Discovery and Control to work on Windows 98, Windows 98
Second
> Edition, and Windows Millennium Edition computers, Internet Explorer
version
> 5.0 or later must be installed.
> g.. The Home networking connection is only present when two or more
> network adapters are installed on the computer.
> h.. Internet Connection Sharing, Internet Connection Firewall, Discovery
> and Control, and Network Bridge are not available on Windows XP 64-Bit
> Edition.
>
>
>
> "Kaushal Shah" <cryskns1@yahoo.com> wrote in message
> news:enBjCvTCCHA.1764@tkmsftngp02...
> > Hi, I have a win2k server in a workgroup enviorment.
> >
> > I have enabled ICS on the Server. I connect my laptop directly to the
> > servers second NIC.
> >
> > I read somewhere that ICS & DNS should not be used together. However,
when
> I
> > stop the DNS service, I am unable to resolve domain names.
> >
> > Can somebody guide me how I should setup ICS.
> >
> > Thanks, Kaushal
> >
> >
>
>
>

Relevant Pages

  • Re: Setting up home wi-fi network that includes my PocketPC.
    ... and other problems with maintaining a connection to the network, ... the signal is) getting a network extender / access point is always an option ... internet connection and it ... not the way I had the cables on the router), but windows did it, ...
    (microsoft.public.pocketpc)
  • Connection to two simultaneous wireless networks, ICS
    ... wireless network adaptor card. ... this particular connection is called "Internet Connection". ... On the PC above, I turned on Internet Connection Sharing ... have to disconnect my laptops from the Home network and reconnect them ...
    (alt.internet.wireless)
  • Re: Help me connect two computers?
    ... I made the mistake of running the network wizard multiple times to try to ... Then someone else says they don't know why anyone uses Network Neighborhood ... connection method for your current setup. ... Internet Connection Sharing host (This computer connects directly to ...
    (microsoft.public.windowsxp.network_web)
  • RE: Problems with Permissions
    ... And SBS server is only take ... the role of an internal server. ... they are all configured to connected to internal network. ... g. Run the Configure Email and Internet Connection Wizard on SBS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: ICS & DNS
    ... To enable Internet Connection Sharing on a network connection ... Open Network Connections. ... Under Internet Connection Sharing, in Home networking connection, ...
    (microsoft.public.win2000.security)