Re: Security Update for Windows XP (KB912919)

Thanks, we're looking into that program with the info you provided.

"NickB" <NickB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F0DB2603-4E54-4D99-87B3-44D62B40DE14@xxxxxxxxxxxxxxxx
> "John [MSFT]" wrote:
>
>> What is the CAD program, and can you provide a small test file in a ZIP
>> that
>> reproduces the behavior?
>>
>> thanks!
>
> Hi John,
>
> The CAD program is IntelliCAD 2000. Further testing with IntelliCAD 2000
> showed that only my old drawings had the problem. When I create a new
> drawing, the dimensions show up just fine. To fix the display of the
> dimensions in the old drawings, I did a select-all in the old drawing,
> copy-to-clipboard and then pasted the whole lot into a newly created
> drawing
> - which then displays all the dimensions properly. This is a very
> painless
> solution for me, so I don't consider it a problem anymore.
>
> Thanks for your quick reply. I'm impressed with Microsoft's quick
> response.
>
> Nick
> --
>


.

Relevant Pages

  • Re: engineering drawing question
    ... about drawings unable to be fabricated unless he went to get dimensions from ... lonely power-tripping clueless engineers, and tired of meeting time wasted ... Every drawing with its points dimensioned (as I had indicated ... relative to another by using the dimensions, such that you must scale it, ...
    (sci.engr.mech)
  • Re: Things that drive one nuts
    ... Since the hole pattern and slot at 100 are features relative to the 100 ... edges, and gave the starting corner for the 100 angles, relative to the ... on the damn drawing relative to the 'square' corner, ... anchor insists that he MUST do dimensions a certain way. ...
    (alt.machines.cnc)
  • Proud to be a CAD Monkey
    ... I'll start by saying that I spent 17 years on a drafting board doing mechanical design before CAD came along. ... When the only layout tool you have is a drafting board, the first task you have is to reduce your idea to just two dimensions, and that for me was always a daunting one. ... I offer this quick drawing I put together of a design for a model loco I am working on... ...
    (rec.models.railroad)
  • Re: Vortex
    ... Any chance of being able to move a section of the drawing - ... need to be able to specify two types of parametric linkage, ... Apollonius is very well worth checking over. ... It's the only CAD program I've ...
    (comp.sys.acorn.apps)
  • Re: How to interpret this package drawing?
    ... maximum dimensions. ... It doesn't even specify the actual width!! ... What's stunning is that the nominal lead pitch is not specified. ... I found another company's drawing for TO-263-5s and they specified the ...
    (sci.electronics.design)