Re: MD5-Challenge on winXP service pack 1

From: gHost (anonymous_at_discussions.microsoft.com)
Date: 06/09/04 

Date: Tue, 8 Jun 2004 22:18:29 -0700

How do i setup IAS? is it available in winXP? or only for
Windows 2003 server?

thanks

>-----Original Message-----
>One alternative would be to build a RADIUS server using
IAS included with
>Windows. It supports EAP-TLS and PEAP. Another would be
to see if you could
>upgrade the software in your access point. A third option
would be to
>investigate WPA, which allows you to configure good
security without a
>RADIUS server -- again, perhaps you could upgrade the
firmware in your AP.
>We have no plans to add EAP-MD5 as an allowed wireless
authentication
>method.
>
>--
>Steve
>steriley@microsoft.com
>
>
>
><anonymous@discussions.microsoft.com> wrote in message
>news:1922501c44cf9$1bbac850$a601280a@phx.gbl...
>> thank you for the reply. What do you think should i do
if
>> i want to use IEEE802.1X? as the AP that i have only
>> supports EAP-MD5.
>>
>> Thankyou.
>>>-----Original Message-----
>>>EAP-MD5 is not cryptographically secure. It transmits
>> password hashes in the
>>>clear and doesn't perform true mutual authentication.
>> For this reason, we do
>>>not permit EAP-MD5 as an allowed authentication for
>> wireless.
>>>
>>>--
>>>Steve
>>>steriley@microsoft.com
>>>
>>>
>>>
>>>"gHost" <anonymous@discussions.microsoft.com> wrote in
>> message
>>>news:18eb601c44c39$7c604fb0$a501280a@phx.gbl...
>>>> Hi, i recently installed an AP that has IEEE 802.1x in
>> it
>>>> and also it has RADUIS server built-in. The AP only
>>>> supports EAP-MD5 Challenge protocol, while winXP SP1
>> only
>>>> support MS-CHAPv2. How do i install the EAP-MD5
>> Challenge
>>>> protocol on winXP SP1? the AP setting are correct. i
>> know
>>>> this because i tried using other client - odyssey
>> client
>>>> manager (demo for 30days) and uses MD5 challenge
>> protocol
>>>> and everything running smoothly. So the only problem
is
>>>> that i want to use WinXP so i don;t need to pay for
the
>>>> client. plese help.
>>>
>>>
>>>.
>>>
>
>
>.
>

Relevant Pages

  • Re: Wireless network with RADIUS server
    ... I've been studying Windows 2003 IAS RADIUS Server to configure the ... service but I'm not sure that it will be a good solution for a Wireless ... network where wireless clients can be using Palm OS or Windows Mobile ...
    (alt.internet.wireless)
  • Wireless GPO
    ... I need to create a policy for Wireless in a GPO of Windows 2000 Server and ... IAS (Radius server) to control the access, and not as of the keys I must use ... in the GPO to be able to restrict the access via wireles to my network. ... I know the way to do it in Windows 2003, ...
    (microsoft.public.win2000.group_policy)
  • 2003 Server and 802.1x w/ WEP
    ... I have a RADIUS server running with an Access Point as a NAS. ... set-up works fine with windows XP supplicants, ... The XP machine is configured to use PEAP/MSCHAP 2, and the WEP key is to be ... Since the radius server used a self signed certificate, ...
    (microsoft.public.windows.server.networking)
  • RE: 802.1x and RADIUS servers
    ... are you using windows server 2003 ias is a radius server built into windows ... Jay Ferron ... ADSI, CISM, CISSP, MCDBA, MCSE, MCT, NSA - IAM ...
    (microsoft.public.win2000.security)
  • Re: help in using IAS as RADIUS Server
    ... See the link below and download chapter 7 Deploying IAS from the Windows ... > standard edition as RADIUS Server ... we have to use RADIUS client as Cisco ...
    (microsoft.public.windows.server.networking)