Re: Sasser & Blaster problem

From: PA Bear (PABear_at_mvps.org)
Date: 05/25/04 

Date: Mon, 24 May 2004 21:49:22 -0400

Instructions for patching and cleaning vulnerable Windows 2000 and Windows
XP systems:

Vulnerable Windows 2000 and Windows XP machines may have the LSASS.EXE
process crash every time a malicious worm packet targets the vulnerable
machine which can occur very shortly after the machine starts up and
initializes the network stack.

When cleaning a machine that is vulnerable to the Sasser worm it is
necessary to first prevent the LSASS.EXE process from crashing, which in
turn causes the machine to reboot after a 60 second delay. This reboot
cannot be aborted on Windows 2000 platforms using the Shutdown.exe or
psshutdown.exe utilities and can interfere with the downloading and
installation of the patch as well as removal of the worm.

1. To prevent LSASS.EXE from shutting down the machine during the cleaning
process: a. Unplug the network cable from the machine b. If you are running
Windows XP you can enable the built-in Internet Connection Firewall using
the instructions found here: Windows XP
http://support.microsoft.com/?id=283673 and then plug the machine back into
the network and go to step 2.

c. If you are running Windows 2000, you won't have a built-in firewall and
must use the following work-around to prevent LSASS.EXE from crashing. This
workaround involves creating a read-only file named 'dcpromo.log' in the
"%systemroot%\debug" directory. Creating this read-only file will prevent
the vulnerability used by this worm from crashing the LSASS.EXE process. i.
NOTE: %systemroot% is the variable that contains the name of the Windows
installation directory. For example if Windows was installed to the
"c:\winnt" directory the following command will create a file called
dcpromo.log in the c:\winnt\debug directory. The following commands must be
typed in a command prompt (i.e. cmd.exe) exactly as they are written below.

1. To start a command shell, click Start and then click run and type
'cmd.exe' and press enter.

2.Type the following command: echo dcpromo >%systemroot%\debug\dcpromo.log

For this workaround to work properly you MUST make the file read-only by
typing the following command:

3. attrib +R %systemroot%\debug\dcpromo.log

2. After enabling the Internet Connection Firewall or creating the read-only
dcpromo.log you can plug the network cable back in and you must download and
install the MS04-011 patch from the MS04-011 download link for the affected
machines operating system before cleaning the system. If the system is
cleaned before the patch is installed it is possible that the system could
get re-infected prior to installing the patch. a. Here is the URL for the
bulletin which contains the links to the download location for each patch:
http://www.microsoft.com/technet/security/bulletin/ms04-011.mspx b. If your
machine is acting sluggish or your Internet connection is slow you should
use Task Manager to kill the following processes and then try downloading
the patch again (press the Ctrl + Alt + Del keys simultaneously and select
Task Manager):

i. Kill any process ending with '_up.exe' (i.e. 12345_up.exe) ii. Kill any
process starting with 'avserv' (i.e. avserve.exe, avserve2.exe) iii. Kill
any process starting with 'skynetave' (i.e. skynetave.exe) iv. Kill hkey.exe
v. Kill msiwin84.exe vi. Kill wmiprvsw.exe

1. Note there is a legitimate system process called 'wmiprvse.exe' that does
NOT need to be killed. c. allow the system to reboot after the patch is
installed.

3. Run the Sasser cleaner tool from the following URL: a. For the on-line
ActiveX control based version of the cleaner you can run it directly from
the following URL: http://www.microsoft.com/security/incident/sasser.asp

b. For the stand-alone download version of the cleaner you can download it
from the following URL:

http://www.microsoft.com/downloads/details.aspx?FamilyId=76C6DE7E-1B6B-4FC3-90D4-9FA42D14CC17&displaylang=en

4. Determine if the machine has been infected with a variant of the Agobot
worm which can also get on the machine using the same method as the Sasser
worm. a. To do this run a full antivirus scan of your machine after ensuring
your antivirus signatures are up to date. b. If you do NOT have an antivirus
product installed you can visit HouseCall from TrendMicro to perform a free
scan using the following URL: http://housecall.trendmicro.com/

If you have any questions regarding the security updates or its
implementation after reading the above listed bulletin you should contact
Product Support Services in the United States at 1-866-PCSafety
(1-866-727-2338). International customers should contact their local
subsidiary. 

-- 
HTH - Please Reply to This Thread
~Robear Dyer (PA Bear)
MS MVP-Windows (IE/OE), AH-VSOP
AumHa Forums
http://forum.aumha.org
Protect Your PC
http://www.microsoft.com/security/protect
Soups wrote:
> Without going into how it happened (a very long story),
> Sasser and Blaster both are occupying my notebook (HP
> ze4230/XP). In a nutshell, it's thanks to no firewall
> protection and a shocking (about 8 months worth) lack of
> patches/updates from MS.
> Right now, all downloads/installations of patches/updates
> from MS are blocked with the familiar NT message. I have
> tried instructions from Symantec, MS and countless others
> to stop the processes so that I can (maybe) download
> updates and a removal tool, but I cannot find any of these
> processes in Task Mgr. These include processes starting
> with 4 or more numbers to msiwin84.exe, all from a very
> recent list from Symantec. I never found Msblast.exe
> either. I have disabled System Restore. I have altered the
> RPC from first, second and subsequent failures to restart
> the service. In a nutshell, I have followed everything,
> but I cannot get rid of this mess.
> Where else might I find Sasser/Blaster to stop the
> processes?
> Is it possible that I could do a System Recovery (not
> restore--I can be dumb, but not that dumb!), add a
> firewall and then go online to install what I need?
> Thanks for the help.
>
> Soups

Relevant Pages

  • Re: Sasser & Blaster problem
    ... >> Windows XP systems: ... >> installation of the patch as well as removal of the worm. ... >> following commands must be typed in a command prompt ... >> must download and install the MS04-011 patch from the MS04-011 download ...
    (microsoft.public.security)
  • Re: Attacked by Spyware and Adware
    ... involve installing a service pack again first and then all critical updates. ... your backed up data media before copying to your new installation. ... Windows 2000 and Windows XP: ... back in or dial out to the Internet and you must download and install the MS04-011 ...
    (microsoft.public.win2000.security)
  • Re: LSASS.EXE
    ... Instructions for patching and cleaning vulnerable Windows 2000 and Windows ... installation of the patch as well as removal of the worm. ... prevent the vulnerability used by this worm from crashing the LSASS.EXE ...
    (microsoft.public.windowsxp.security_admin)
  • Best Links
    ... How To Use Ubuntu portable in Windows without installation ... Download Free junk file cleaner for Mac OSX ... Nightglow Offers Tabbed Browsing For The iPhone, ... 40 Great Open Source Apps To Windows ...
    (comp.soft-sys.matlab)
  • Re: Zotob worm patch?
    ... The vulnerability could not be exploited remotely by ... > I know that many in this group support downloading Windows XP ... I download and install ONLY what is absolutely ... > about the Zotob worm, I.E., PnP and compromised Windows security. ...
    (microsoft.public.windowsxp.general)