Re: hijacked computer

From: SG (sorry_at_nomail.com)
Date: 03/25/05

  • Next message: Bullwinkle. J. Moose: "Re: hijacked computer" 
    Date: Fri, 25 Mar 2005 15:09:22 -0500

    Is Rocky still living :>)

    All the best, 

    -- 
George Aker aka SG
Google is your friend www.google.com
Anything else is just a search engine
"Bullwinkle. J. Moose" <moose.nyc@nospam.verizon.net> wrote in message
news:tRY0e.16354$aS5.7210@trndny05...
> These programs do not generally interact unless you are running the 3 av
> programs at the same time. Same goes for the other comments.
>
> The best way is to really get offline and clean up the computer. Run all
the
> programs one at a time twice. Reboot in between each run.
>
> Be sure your firewall is off. Remove any outside connections while you are
> doing this. When all is done pick one firewall preferably a hardware unit
> and leave that in place.
>
> If you are running a wireless setup you could be crossed frequencies with
> someone else and that is causing your problem as well.
>
> It's going to take a lot of patience especially if your drives are big and
> many.
>
> Good luck.
>
>
> "jeffrey" <jeffrey@nospam.okinawa.com> wrote in message
> news:egWyO8EMFHA.656@TK2MSFTNGP14.phx.gbl...
> > do you have both AV and 3 firewalls on the same computer?  normally that
> > would cause problems and conflicts.  You should really have 1 AV and 1
> > software firewall installed.  Then use a hardware firewall, like a NAT
> > Router.  Best thing to do is copy your data to some sort of backup and
do
> > a
> > fresh install.  Also have the spyware soft saved on CD to install them
> > after
> > the fresh install.  Before connecting up to the net, ensure the software
> > firewall is setup and the AV installed as well, then do your updates.
> >
> > Sometimes having too many software firewalls can open up gaps or have
each
> > one cancel each other out.  You really only need 2 types of firewalls,
one
> > software installed on the computer and one hardware, such as a Router
with
> > built-in firewall and NAT.  Also just use one AV and ensure it can check
> > for
> > updates everyday or have the type the server will notify it of a new
> > update.
> >
> > Jeff
> >
> > "wight" <wight@discussions.microsoft.com> wrote in message
> > news:DAE16453-0726-4084-ADC4-6E467059484B@microsoft.com...
> >> lost the last info please send again
> >> -- 
> >> wight
> >
>
>
  • Next message: Bullwinkle. J. Moose: "Re: hijacked computer"

    Relevant Pages

    • Re: Latest Update Wreaked Havok - Cannot Restore
      ... track of what you install in order to be able to uninstall it. ... been diligent with your critical updates, ... Windows Update ... You should at least turn on the built in firewall. ...
      (microsoft.public.windowsxp.perform_maintain)
    • Re: Answer for 100% CPU usage by SVCHOST on first boot
      ... One hardware firewall in my Dlink DI-524 router and the Firewall provided ... I can't fix the 100% cpu usage, ... Each install was clean from a XP Pro Volume License SP1 CD. ... Automatic Updates was hogging 98% of the CPU. ...
      (microsoft.public.windowsupdate)
    • Re: popups driving me nuts
      ... download the latest and install it again - to be ... And be sure to check for updates before you scan ... Uninstall what you have, download ... Why you should use a computer firewall.. ...
      (microsoft.public.windows.inetexplorer.ie6.browser)
    • Re: Downloading updates in advance
      ... operating system with the Windows Firewall enabled by just going to Windows ... when an application goes to the publishers website to check for updates ... Windows XP install disk would have no malware on it. ...
      (microsoft.public.windowsxp.security_admin)
    • Re: Service Pack 1 & 2
      ... but enable to install because of service pack 2. ... >> I recently reinstalled Windows XP home on a new hard disk because the ... >> I tried to install service pack 1 but was rejected from doing so. ... > Why you should use a computer firewall.. ...
      (microsoft.public.windowsupdate)