Re: IIS SSL spoof detected by firewall

Do you have "default gateways" configured on both NICs?

you should have only a single default gateway (on one of the NICs), and configure static routes for all other non-local subnets and have them routed through the other NIC

Cheers
Ken

"Bob Jones" <rljones39@xxxxxxxxxxx> wrote in message news:uM8OoVAyHHA.748@xxxxxxxxxxxxxxxxxxxxxxx
Hi all,

I'm supporting an external web site with IIS6 and SSL on a server with Windows 2003 (dual nic cards). There is an internal web application on the same box using one of the NIC cards, which is behind the firewall and not accessible to the net. The external site is using the other card, which has an internet address, and is sitting in a DMZ on the firewall.

I'm having trouble activating the web site because the firewall detects a spoof during login. It appears like the response is going out the primary nic card (mac address reported by the firewall) instead of the correct card.

NLB is not installed on the primary nic card. Each card has it own DNS specific connection suffix.

The NIC cards are both on the Netserver lp1000 motherboard.

I'm out of ideas, can anyone help or point me in the right direction?

Thanks,

rljones39




.

Relevant Pages

  • Re: No BackOffice Internet Users Group
    ... We have our server hooked up to a Win98 machine w/ 2 NIC cards as our ... This requires 2 NICs in your SBS ... >> a way to set up a group with restricted internet access. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Physically moving SBS2000 to newer motherboard setup (drives and nics)
    ... physically take both the Nics out and use them on the new ... motherboard, I should go through the steps of looping the ... >resources on the new mobo. ... I will be using the same nic cards, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Cannot connect to router setup page
    ... > I've got a Linux Fedora box with two NIC cards. ... The DHCP one is connected to a router which is connected to the ... Are both nics on same subnet on same physical network? ...
    (comp.os.linux.networking)
  • Re: Is it possible to bridge three NIC on a Windows 2000 Server
    ... > Where can I get a teaming NIC driver for all those NIC cards? ... There may be an add-on driver for random NICs, ... >>> multiple NIC cards on the server, you can Send Data and Retrieve data ...
    (microsoft.public.win2000.networking)
  • Re: CEICW fails at firewall config
    ... Do you or do you not have ISA 2000 or ISA 2004 installed on the SBS server? ... Do you have 2 NICs in the SBS? ... CEICW fails on firewall configuration every time. ... >>> Call to Creating the protected networks access rule returned ok. ...
    (microsoft.public.windows.server.sbs)