Re: Certificates on .local domain

Hi,

Your public domain (itadmin.fi) needs public DNS servers. This allows remote
users to lookup hosts in the itadmin.fi domain, and find the associated IP
addresses.

When you registered the domain, you need to specify authorative DNS servers
for the domain. Those are the public DNS servers for the domain. On those
DNS servers you need to create an appropriate A (Alias) or CNAME (canonical
name) record that points somehostname.itadmin.fi -> your public IP address.

Cheers
Ken

"Juha Kalliola" <JuhaKalliola@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:69E77162-2D6F-4129-AA2A-B4FB734B1FC0@xxxxxxxxxxxxxxxx
I'm sorry but I don't understand. If I give you details could you help me
out.

Our server is "serveri.itadmina.local", it has a public IP address.
Our mailboxes and web server is on ISP. We use POP3 connector to collect
email from ISP to Exchange.

Our registered domain is "itadmina.fi".
Where and what changes I must do on our internal server to have this FQDN
recorded there?

"Bernard Cheah [MVP]" wrote:

The FQDN concept apply, so you need to create a Host record that match
your
cert common name and point it to your server.

--
Regards,
Bernard Cheah
http://www.iis-resources.com/
http://www.iiswebcastseries.com/
http://msmvps.com/blogs/bernard/


"Juha Kalliola" <JuhaKalliola@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:18C65CF9-718F-4144-A268-C9F379A75840@xxxxxxxxxxxxxxxx
Thanks Bernard,

I have registered domain name. The article you included is about FTP.
How
does it help me in this case?

Best,
Juha

"Bernard Cheah [MVP]" wrote:

First, you need to register a domain...... then ......
Read http://support.microsoft.com/?id=816525

--
Regards,
Bernard Cheah
http://www.iis-resources.com/
http://www.iiswebcastseries.com/
http://msmvps.com/blogs/bernard/


"Juha Kalliola" <JuhaKalliola@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:E132FB85-63A9-4BA8-AA03-E3BC891A4DEA@xxxxxxxxxxxxxxxx
Thanks Ken,

Could you tell me also how can I configure FQDN like yours to my SBS
server?
Where I configure it?

Best,
Juha

"Ken Schaefer" wrote:

Hi,

The "common name" of the certificate should match whatever DNS name
you
are
using in your phone to connect to the Server ActiveSync or OMA
website.

For example, my SBS server has in the .local domain (and that's how
we
access it internally).

However, for external access it has a host.adopenstatic.com FQDN.
The
certificate that I installed has a common name that matches
host.adopenstatic.com

Cheers
Ken

--
My IIS Blog: www.adOpenStatic.com/cs/blogs/ken


"Juha Kalliola" <JuhaKalliola@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:E3EA499D-9666-4908-9FE3-1A975E1F9174@xxxxxxxxxxxxxxxx
I got it working once. After I madeome changes but haven't got it
working
anymore.
I can accept and install certificates to my phone and that is not
the
problem.
The problem is on the server and with the certificate. And as I
mentioned
I
got it working once but not anymore.

"Miha Pihler [MVP]" wrote:

Hi,

Are you connecting to OWA over HTTPS (SSL)?

The problem with some phones is that they will not allow (at
least
by
default) to see the pages protected with certificates that they
do
not
trust. So the simple solution is to buy a certificate from
commercial
CA
server like Thawte or VeriSign.

--
Mike
Microsoft MVP - Windows Security

"Juha Kalliola" <JuhaKalliola@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote
in
message
news:E9F7DD53-C84C-4E6D-BC9D-F414AC4B6F27@xxxxxxxxxxxxxxxx
Hi,

we are using SBS2003 with outlook web access and active sync.
I have been trying to make working certificate with more or
less
success.

How should it be made.
Our sbs domain is with suffix .local. We have a public IP
address
for
our
server.
I can connect to OWA with public IP address. But how should
the
certificate
be made so I can use OMA in my mobile phone in this case?














.

Relevant Pages

  • RE: Help with Internet and Email wizard
    ... Thank you for posting in the SBS newsgroup. ... On SBS Server, run the CEICW, go through "Connection Type" page, on ... Since we don't want to set up an external internet access, ... We can select Option one "Create a new Web server certificate" to ...
    (microsoft.public.windows.server.sbs)
  • RE: ActiveSync and T-Mobile Treo 650
    ... Thank you for posting in the SBS newsgroup. ... Generally, to publish ActiveSync, you just need to run the CEICW and enable ... Method 2 - Replace your Exchange Web Publishing rule with a Server ... new certificate on the Exchange server to match the new url being used to ...
    (microsoft.public.windows.server.sbs)
  • Re: Outlook RPC over HTTp deosnt work
    ... Certificate, click Install Certificate, and then follow the instructions. ... when you try to use RPC over HTTP to connect the Exchange Server. ... In SBS 2003, we don't have to manually configure RPC over HTTP. ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS2003 + .local domain = no ActiveSync?
    ... I have created a Forward Lookup Zone in our SBS DNS and created the appropriate Host records as suggested elsewhere in this thread. ... However, I still have certificate problems, with WM5 on the Qtek device telling me that the certificate on the SBS is invalid. ... Actually disabling SSL on the server DOES help - ActiveSync works fine if SSL is not required. ...
    (microsoft.public.windows.server.sbs)
  • Re: Outlook RPC over HTTp deosnt work
    ... Certificate, click Install Certificate, and then follow the instructions. ... when you try to use RPC over HTTP to connect the Exchange Server. ... In SBS 2003, we don't have to manually configure RPC over HTTP. ...
    (microsoft.public.windows.server.sbs)