Re: Load balancing loses authentication

From: Jim Corey (jcorey_at_nospamcharter.net)
Date: 08/30/04


Date: Mon, 30 Aug 2004 12:43:50 -0700


M,

Much thanks for the reply, but we do not use Application Center.

Was this procedure going to affect the configuration of
the F5 switch (something I know nothing about)?
Note that I mentioned that this was already set up with sticky sessions,
which work except for this one situation.

Jim

*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!



Relevant Pages

  • Re: MSTP, LACP (and possible UDLD?)
    ... Switch A - HP ProCurve 6200yl ... Status and Counters - Port Status ... Relevant parts of the configuration from one of the routers/switches, ... spanning-tree Trk1 priority 0 ...
    (comp.dcom.lans.ethernet)
  • [git patches] net driver fixes
    ... a bitrotten variant of the slip driver. ... Contains general updates (additional configuration info, ... Configuring Bonding Devices ... High Availability in a Single Switch Topology ...
    (Linux-Kernel)
  • Strannge situation with two SRW224G4 and one Cisco 2950-12
    ... LinkSys SRW224G4 switch as described at scheme. ... forwarding via another trunk port to second SRW224G4 and then to Cisco ... vlan40 is described in VLAN DB of all three switches. ... So I suspect that problem is in Cisco switch configuration or IOS. ...
    (comp.dcom.sys.cisco)
  • Re: Erroneous Compile Errors
    ... winforms custom controls, some class libraries and 1 ATL3 COM DLL. ... > If I then switch back to the original solution configuration then it also builds with no errors. ...
    (microsoft.public.vsnet.general)
  • Re: Network Multipathing Question
    ... requires two switches and no switch configuration is necessary. ... backup port (inactive) ... The second card would be on standby. ...
    (AIX-L)