Security Vulnerabilities in SNMP (rev.16)
From: Security Alert (secure@cup.hp.com)
Date: 02/19/03
- Next message: Security Alert: "SSRT2274 Potential Sec. Vulnerability in rpc.ttdbserver (rev.5)"
- Previous message: Marc Brevoort: "It's about money so let's be paranoid"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
From: secure@cup.hp.com (Security Alert) Date: Wed, 19 Feb 2003 17:24:08 GMT
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
- ----------------------------------------------------------------
**REVISED 16**
Source: HEWLETT-PACKARD COMPANY
SECURITY BULLETIN: #0184,
Originally issued: 12 Feb. 2002
Last revision: 19 Feb. 2003
Security Vulnerabilities in SNMP
----------------------------------------------------------------
The information in the following Security Bulletin should be acted
upon as soon as possible. Hewlett-Packard Company will not be
liable for any consequences to any customer resulting from customer's
failure to fully implement instructions in this Security Bulletin as
soon as possible.
------------------------------------------------------------------
PROBLEM: Vulnerabilities in SNMP request and trap handling.
**REVISED 16**
PLATFORM: HP 9000 Series 700 and Series 800 running HP-UX
releases 10.X and 11.X
HP Procurve switches
HP TopTools Remote Control Card
JetDirect Firmware
MC/ServiceGuard, EMS HA Monitors
--->> Solaris running OpenView NNM or OVO or SAM products
--->> Windows/NT running OpenView NNM or VPW or SAM products
--->> HP-UX running OpenView NNM or OVO/ITO or SAM products
DAMAGE: Possible denial-of-service, service interruptions,
unauthorized access.
**REVISED 16**
SOLUTION: Apply patches or implement workarounds. See below.
For HP-UX releases:
PHSS_26510 s700_800 HP-UX 10.10, 10.01 Emanate 14.0
PHSS_26137 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_27181 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_26367 s700_800 HP-UX 10.24 VirtualVault (VVOS)
PHSS_26138 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_27182 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_26368 s700_800 HP-UX 11.04 VirtualVault (VVOS)
PSOV_03087 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03162 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03113 Solaris 2.3, Solaris 2.4 Emanate Release 14.0
For systems running OV NNM install the above SNMP
patches for HP-UX and Solaris in addition to the NNM
patches listed below.
For Windows/NT install:
NNM_00846 Windows NT4.0/4.01, Windows 2000
NNM_00909 Windows NT4.0/4.01, Windows 2000
NNM 6.2
PHSS_26932 NNM 6.2 HP-UX 10.20
PHSS_26933 NNM 6.2 HP-UX 11.X
NNM_00890 NNM 6.2 Win NT/2k
PSOV_03144 NNM 6.2 Solaris 2.X
NNM 6.1 Note: both patches are required.
PHSS_26918, PHSS_26908 NNM 6.1 HP-UX 10.20
PHSS_26919, PHSS_26909 NNM 6.1 HP-UX 11.X
NNM_00889, ECS_00011 NNM 6.1 Win NT/2k
PSOV_03143, PSOV_03142 NNM 6.1 Solaris 2.5,
2.6, 2.7, 2.8
--->> NNM 6.0X
--->> PHSS_27221 NNM6.0X HP-UX 10.20
--->> PHSS_27222 NNM6.0X HP-UX 11.X
--->> NT 4.X/Windows 2000: NNM_00914
--->> PSOV_03165 NNM6.0X Solaris 2.5, 2.6, 2.7
NNM 5.01
PHSS_26806 NNM 5.01 HP-UX 10.20
PSOV_03136 NNM 5.01 Solaris 2.X
--->> NNM 5.02 (Windows NT 3.51/4.0)
--->> NNM_00945 NNM5.0x pmd/ovtrapd fixes
NNM 4.11
PHSS_26777 NNM 4.11 HP-UX 10.20
PSOV_03132 NNM 4.11 Solaris 2.X
OpenView Distributed Management 5.03
PHSS_27273 - HP-UX 10.X
PHSS_27274 - HP_UX 11.X
PSOV_03173 - Solaris 2.X
OpenView Distributed Management 6.0
PHSS_27437 - HP-UX 10.X
PHSS_27438 - HP_UX 11.00
PSOV_03188 - Solaris 2.X
**REVISED 16**
MANUAL ACTIONS: Non-HP-UX only. See HPSBUX0301-236
AVAILABILITY: Patches for some affected systems are available now.
CHANGE SUMMARY: Rev.01 affected HP Procurve scope expanded,
plus Procurve patch availability added.
NNM ovtrapd patch availability added.
Rev.02 SG and EMS found not vulnerable.
Rev.03 JetDirect vulnerability updated
Rev.04 NNM 5.X and VVOS patches, vulnerability note
for Solaris, and Windows NT.
Rev.05 VVOS patch ID typo.
Rev.06 Updating NNM 5.X section, HP OC SS7 added
Rev.07 Added OpenView product status list
Rev.08 Added NNM 5.01 and 4.11 patches for HP-UX
and Solaris
Rev.09 New NNM 6.1 and NNM 6.2 patches, additional
Emanate patches, and TopTools Remote
Control Card information
Rev.10 Additional Emanate and NNM patches.
Rev.11 PHSS_27181,PHSS_27182, are only found on:
http://support.openview.hp.com/cpe/patches/
Rev.12 OpenView Distributed Management 5.03
patches added. Added pointer to HP Compaq
security advisory.
Rev.13 Further expanded affected Procurve
switch scope.
Rev.14 Added OpenView Distributed Management 6.0
patches.
Rev.15 Modified Manual Actions field.
--->> Rev.16 Corrected Emanate, DM and NNM patches, added
final JetDirect f/w fix, OV/SAM products
finalized.
------------------------------------------------------------------
A. Background
CERT has issued an advisory:
CERT Advisory CA-2002-03 Multiple Vulnerabilities in Many
Implementations of the Simple Network Management Protocol
(SNMPv1) containing information about the vulnerabilities.
Hewlett-Packard Company will revise this bulletin as new
information becomes available.
---------------------------------------------------------
HP Procurve switches
---------------------------------------------------------
We have created fixes for products below which will resolve
these issues. See Section C below.
---------------------------------------------------------
HP TopTools Remote Control Card
---------------------------------------------------------
TopTools Remote Control (TTRC) card, rev. 2.0. (product
P1218A) has an SNMP MIB defect.
---------------------------------------------------------
NNM (Network Node Manager)
---------------------------------------------------------
Some problems found in NNM product were related to trap
handling. Patches are available. See Section C below.
---------------------------------------------------------
JetDirect Firmware
---------------------------------------------------------
JetDirect Firmware Version State
========================== =====
X.08.32 and lower VULNERABLE
(where X = A through K)
X.21.00 and higher NOT vulnerable
(where X = L through P)
----------------------------------------------------------
HP-UX Systems running snmpd or OpenView
----------------------------------------------------------
Any HP-UX 10.X or 11.X system running snmpd or snmpdm is
vulnerable. To determine if your HP-UX system has snmpd
or snmpdm installed:
swlist -l file | grep snmpd
----------------------------------------------------------
Other systems running OpenView or NNM
----------------------------------------------------------
Solaris and Windows/NT systems running OpenView or NNM
are vulnerable.
**REVISED 16**
----------------------------------------------------------
OpenView Product Status
----------------------------------------------------------
NNM Vulnerable
Note:
--->> All patches for NNM 6.2, NNM 6.1,
--->> NNM6.0X, NNM 5.01, NNM 5.02, NNM 4.11,
--->> and Emanate are now complete.
NNM also ships Emanate SNMP Agents
so patches for Emanate SNMP Agents
should also be applied (See section
"C. Recommended solution" below).
----------------------------------------------------------
ITO/VPO/OVO on Vulnerable
Unix Patches released
Note:
This product bundles the NNM and
Emanate Agents with it. Appropriate
NNM and Emanate Agent patches should
also be applied. (See section
"C. Recommended solution" below).
----------------------------------------------------------
-->>OVO Windows Patches released
VPW/OVO Windows Note:
OVO bundles the NNM and Emanate Agents
with it. Appropriate NNM and Emanate
agent patches should also be applied.
(See section "C. Recommended solution"
below).
----------------------------------------------------------
Extensible Agent Vulnerable
(EA) Patches released
(See section "C. Recommended solution"
below).
----------------------------------------------------------
Emanate SNMP Agents Vulnerable
Patches released:
(See section "C. Recommended solution"
below).
**REVISED 16**
----------------------------------------------------------
- ---> OV/SAM Suite (including Storage Node Manger, Optimizer,
- ---> Allocator, Builder and Accountant).
- ---> ----------------------------------------------------------
- --->
- ---> The OV/SAM Suite components always acts as a SNMP client
- ---> (not an agent), with the single exception of SNMP traps,
- ---> discussed below. As a client the question of agent
- ---> vulnerability does not apply.
- ---> OV/SAM Trap Handler:
- ---> The OV/SAM Suite provides a trap handler (using port 162)
- ---> to receive and process traps. The 3.0 release of the product
- ---> is not vulnerable to denial of service attacks.
----------------------------------------------------------
- ---> OV/SA (Service Assurance)
- ---> OV/SA is based on DM 6.0 and requires that OV/DM 6.0 be
- ---> patched (see below).
----------------------------------------------------------
- ---> OV/OEMF (Open Element Management Framework)
- ---> OV/OEMF is based on OV/DM 5.03 and requires that OV/DM 5.03
- ---> be patched (see below).
----------------------------------------------------------
DM DM Release 5.03 Vulnerable.
Patches released:
(See section "C. Recommended solution"
below).
DM Release 6.0 Vulnerable.
Patches released:
(See section "C. Recommended solution"
below).
----------------------------------------------------------
Note: An HP Compaq security advisory (SSRT0779) is available
at http://ftp.support.compaq.com/patches/.new/html/SSRT0779.shtml
B. Fixing the problem
Install the appropriate patch or firmware revision or work
around problem as detailed below.
C. Recommended solution
**REVISED 16**
-->> Note - On HP-UX, running Security_Patch_Check as mentioned
-->> in section C (below) will help verify that all
-->> applicable security fixes have been implemented.
---------------------------------------------------------
HP Procurve switches
---------------------------------------------------------
Customers can download these patches in the form of software
upgrades at:
http://www.hp.com/rnd/software/switches.htm
Product Fix revision number
----------------------------------- -------------------
HP Procurve Switch 2524 (J4813A) F.04.08 or greater
HP Procurve Switch 2512 (J4812A) F.04.08 or greater
HP Procurve Switch 4108GL (J4865A) G.04.05 or greater
HP Procurve Switch 4108GL-bundle (J4861A) G.04.05 or greater
HP Procurve Switch 1600M (J4120A) C.09.13 or Greater
HP Procurve Switch 2400M (J4120A) C.09.13 or Greater
HP Procurve Switch 2424M (J4122A) C.09.13 or Greater
HP Procurve Switch 4000M (J4121A) C.09.13 or Greater
HP Procurve Switch 8000M (J4110A) C.09.13 or Greater
---------------------------------------------------------
NNM (Network Node Manager)
---------------------------------------------------------
**REVISED 16**
Problems found in all NNM products are addressed in
patches. They are available at:
http://support.openview.hp.com/cpe/patches/nnm/
NNM 6.2 HP-UX 10.20 PHSS_26932
NNM 6.2 HP-UX 11.X PHSS_26933
NNM 6.2 Win NT/2k NNM_00890
NNM 6.2 Solaris 2.X PSOV_03144
NNM 6.1 HP-UX 10.20 PHSS_26918, PHSS_26908
NNM 6.1 HP-UX 11.X PHSS_26919, PHSS_26909
NNM 6.1 Win NT/2k NNM_00889, ECS_00011
NNM 6.1 Solaris 2.5, 2.6,
2.7, and 2.8 PSOV_03143, PSOV_03142
Note: For NNM 6.1 both listed patches are required.
--> For older NNM 6.0X, 5.0X, and 4.11 (HP-UX and Solaris
versions only) see the list below, and obtain the patches
from:
http://support.openview.hp.com/cpe/patches/nnm/nnm.jsp
NNM 4.11
--------
HP-UX 10.20 PHSS_26777
Solaris 2.X PSOV_03132
NNM 5.01
--------
HP-UX 10.20 PHSS_26806
Solaris 2.X PSOV_03136
--->> NNM 5.02
--->> --------
--->> WinNT 3-4.X NNM_00945
--->> NNM 6.0 and 6.01
--->> ---------------
--->> HP-UX 10.20 PHSS_27221
--->> HP-UX 11.00 PHSS_27222
--->> WinNT4.X/Win2000 NNM_00914
--->> Solaris 2.X PSOV_03165
---------------------------------------------------------
DM (OpenView Distributed Management)
---------------------------------------------------------
Problems found in the OpenView Distributed Management 5.03
are addressed in patches:
PHSS_27273 - HP-UX 10.X
PHSS_27274 - HP_UX 11.X
PSOV_03173 - Solaris 2.X
Problems found in the OpenView Distributed Management 6.0
are addressed in patches:
PHSS_27437 - HP-UX 10.X
PHSS_27438 - HP_UX 11.00
PSOV_03188 - Solaris 2.X
All of these DM patches are available at:
http://support.openview.hp.com/cpe/patches/dm/dm.jsp
---------------------------------------------------------
MC/ServiceGuard
---------------------------------------------------------
MC/ServiceGuard is not affected. Testing has been completed
and neither MC/ServiceGuard nor ServiceGuard OPS Edition are
negatively impacted.
The ServiceGuard Manager product does not use the cluster
SNMP and remains unaffected.
---------------------------------------------------------
Event Monitoring System (EMS)
---------------------------------------------------------
Testing of the MC/ServiceGuard or ServiceGuard OPS Edition
application with package resources defined using EMS High
Availability Monitors has been completed and shows no
vulnerability to this issue.
---------------------------------------------------------
HP TopTools Remote Control Card
---------------------------------------------------------
TopTools Remote Control (TTRC) card, rev. 2.0. (product
P1218A) has an SNMP MIB defect. This is fixed in firmware
version B.03.02 available at:
http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix62319.html
---------------------------------------------------------
JetDirect Firmware
---------------------------------------------------------
**REVISED 16**
JetDirect Firmware Version State
========================== =====
X.08.32 and lower VULNERABLE
(where X = A through K)
X.21.00 and higher NOT vulnerable
(where X = L through P)
-->> FIX STATUS: The firmware fix is X.08.40 or newer.
(where X = A through K)
-->> The document describing this vulnerability and installation
-->> of the firmware for affected devices is available at:
-->> http://h20015.www2.hp.com/en/
document.jhtml?lc=en&docName=bpj07122
LIMITING THE VULNERABILITY
SNMPv1 security relies on the set community name. It is
important that a set-community-name be configured on the
JetDirect device and that it be kept secret.
JetDirect Print Servers offer an Access Control List that
can be used to specify which hosts can make SNMP
configuration changes to JetDirect Print Servers.
The steps above can help prevent exploitation of the
vulnerability. To eliminate the vulnerability before a fix
is available SNMP can be disabled on the JetDirect device.
DISABLING SNMP ON A JETDIRECT PRINT SERVER
1. Update the firmware to the highest level as described in
the JetDirect Upgrade Instructions document:
http://www.hp.com/cposupport/networking/support_doc/bpj06917.html
NOTE: Disabling SNMP may affect device discovery and port
monitors that use SNMP to get status on the device.
Use this feature with care.
2. Telnet to the JetDirect device (on the latest firmware)
and type:
snmp-config: 0
quit
This will completely disable SNMP on the JetDirect device.
HP always recommends upgrading JetDirect firmware for the
latest bug fixes and security benefits. The upgrade firmware
and download utility are available free of charge:
http://www.hp.com/cposupport/networking/support_doc/bpj06917.html
The following is a list of JetDirect Product Numbers
that can be freely upgraded to X.08.32 or X.21.00 or
higher firmware. The latest firmware revision available
for download is given. For example, the latest firmware
revision for the J3110A is G.08.32.
EIO (Peripherals LaserJet 4000, 5000, 8000, etc...)
--->> J3110A 10T [G.08.40]
--->> J3111A 10T/10B2/LocalTalk [G.08.40]
--->> J3112A Token Ring (discontinued) [G.08.40]
--->> J3113A 10/100 (discontinued) [G.08.40]
--->> J4169A 10/100 [L.22.09]
--->> J4167A Token Ring [L.22.09]
J6057A 10/100 [R.22.09]
MIO (Peripherals LaserJet 4, 4si, 5si, etc...)
--->> J2550A/B 10T (discontinued) [A.08.40]
--->> J2552A/B 10T/10Base2/LocalTalk (discontinued) [A.08.40]
--->> J2555A/B Token Ring (discontinued) [A.08.40]
--->> J4100A 10/100 [K.08.40]
--->> J4105A Token Ring [K.08.40]
--->> J4106A 10T [K.08.40]
LIO (Peripherals Color InkJet cp1160, cp1700)
--->> J6042A 250m 10/100 [N.22.09]
External Print Servers
--->> J2591A EX+ (discontinued) [E.08.40]
--->> J2593A EX+3 10T/10B2 (discontinued) [D.08.40]
--->> J2594A EX+3 Token Ring (discontinued) [D.08.40]
--->> J3263A 300X 10/100 [H.08.40]
--->> J3264A 500X Token Ring [J.08.40]
--->> J3265A 500X 10/100 [J.08.40]
J6038A 310x USB 10/100 [Q.22.04]
----------------------------------------------------------
HP-UX Systems running snmpd or OpenView
----------------------------------------------------------
The following patches are available now:
PHSS_26510 s700_800 HP-UX 10.10, 10.01 Emanate 14.0
PHSS_26137 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_27181 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_26367 s700_800 HP-UX 10.24 VirtualVault (VVOS)
PHSS_26138 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_27182 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_26368 s700_800 HP-UX 11.04 VirtualVault (VVOS)
PSOV_03087 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03162 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03113 Solaris 2.3, Solaris 2.4 Emanate Release 14.0
For systems running OV NNM install above SNMP
patches for HP-UX and Solaris.
For Windows/NT install:
NNM_00846 Windows NT4.0/4.01 Windows 2000
NNM_00909 Windows NT4.0/4.01 Windows 2000
**REVISED 16**
--->> PSOV_03087, PSOV_0162, NNM_00846, NNM_00909, PSOV_03113,
--->> PSOV_03165, and PHSS_27181, PHSS_27182, PHSS_27221,
--->> PHSS_27222 are available from:
http://support.openview.hp.com/cpe/patches/
PHSS_26367 and PHSS_26368 available from:
http://itrc.hp.com
PHSS_26510, PHSS_26137, and PHSS_26138 are available
from both sites.
The HP OC SS7 (OpenCall) products J3362A and J5938A running
on HP-UX releases 10.20 and 11.X are not vulnerable if the
applicable HP-UX patch listed above is installed.
============================================================
NOTE: These patches are labeled OV (OpenView). However, the
patches are also applicable to systems that are _NOT_
running OpenView.
============================================================
Workaround for HP-UX Systems:
If a patch is not available for your platform or you cannot
install an available patch, snmpd and snmpdm can be disabled
by removing their entries from /etc/services and removing the
execute permissions from /usr/sbin/snmpd and /usr/sbin/snmpdm.
**REVISED16**
----------------------------------------------------------
- -->> HP-UX Systems running OV/SAM 3.0.1 Patch Release (only):
----------------------------------------------------------
-->> Beginning with the OV/SAM 3.0.1 patch, the Microsoft SNMP
-->> Trap Service is used (in order to share access to port 162).
-->> Microsoft recommends a patch for SNMP
-->> NOTE: pre-3.0 versions of SAM (2.x versions) are not
-->> affected by this issue. No action is required.
-->>
-->> This patch only applies to the OV/SAM management system (not
-->> clients or host systems). Therefore, only Windows 2000 will
-->> be vulnerable and only with Service Pack 2 (Service Pack 2 is
-->> the required software). Microsoft has already included the
-->> patch in Service Pack 3. OV/SAM 3.0 does support SP2 and SP3.
-->> For more information, refer to Microsoft's Web site:
-->>
-->> http://www.microsoft.com/technet/treeview/default.asp?url=
-->> /technet/security/bulletin/MS02-006.asp
-->>
-->> Implement one of the following three potential solutions for
-->> OV/SAM 3.0.1:
-->>
-->> 1. Uninstall Microsoft's SNMP trap service and restart
-->> OV/SAM's service. OV/SAM will automatically revert to
-->> its 3.0 style of trap processing,
-->>
-->> 2. Upgrade to Microsoft's Service Pack 3 (which includes the
-->> patch); again SAM 3.0 supports both SP2 and SP3,
-->>
-->> 3. Install the patch from Microsoft.
-->> NOTE: pre-3.0 versions of SAM (2.x versions) are not
-->> affected by this issue.
D. To subscribe to automatically receive future NEW HP Security
Bulletins from the HP IT Resource Center via electronic
mail, do the following:
Use your browser to get to the HP IT Resource Center page
at:
Use the 'Login' tab at the left side of the screen to login
using your ID and password. Use your existing login or the
"Register" button at the left to create a login, in order to
gain access to many areas of the ITRC. Remember to save the
User ID assigned to you, and your password.
In the left most frame select "Maintenance and Support".
Under the "Notifications" section (near the bottom of
the page), select "Support Information Digests".
To -subscribe- to future HP Security Bulletins or other
Technical Digests, click the check box (in the left column)
for the appropriate digest and then click the "Update
Subscriptions" button at the bottom of the page.
or
To -review- bulletins already released, select the link
(in the middle column) for the appropriate digest.
NOTE: Using your itrc account security bulletins can be
found here:
http://itrc.hp.com/cki/bin/doc.pl/screen=ckiSecurityBulletin
To -gain access- to the Security Patch Matrix, select
the link for "The Security Bulletins Archive". (near the
bottom of the page) Once in the archive the third link is
to the current Security Patch Matrix. Updated daily, this
matrix categorizes security patches by platform/OS release,
and by bulletin topic. Security Patch Check completely
automates the process of reviewing the patch matrix for
11.XX systems.
For information on the Security Patch Check tool, see:
http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
displayProductInfo.pl?productNumber=B6834AA
The security patch matrix is also available via anonymous
ftp:
ftp://ftp.itrc.hp.com/export/patches/hp-ux_patch_matrix/
On the "Support Information Digest Main" page:
click on the "HP Security Bulletin Archive".
E. To report new security vulnerabilities, send email to
Please encrypt any exploit information using the
security-alert PGP key, available from your local key
server, or by sending a message with a -subject- (not body)
of 'get key' (no quotes) to security-alert@hp.com.
------------------------------------------------------------------
(c)Copyright 2003 Hewlett-Packard Company
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
in this document is subject to change without notice.
Hewlett-Packard Company and the names of HP products referenced
herein are trademarks and/or service marks of Hewlett-Packard
Company. Other product and company names mentioned herein may be
trademarks and/or service marks of their respective owners.
________________________________________________________________
-----BEGIN PGP SIGNATURE-----
Version: PGP Personal Security 7.0.3
iQA/AwUBPlOhXOAfOvwtKn1ZEQLlUACeK1gm4xmRD4ZlyixsJmE9D91QatsAn34+
CP4gmIPdulOqLTfdkCWiYow1
=sk+/
-----END PGP SIGNATURE-----
-- Yours truly, HP S/W Security Team WTEC Cupertino, California Return-Path: secure@cup.hp.com Reply-to: security-alert@hp.com
- Next message: Security Alert: "SSRT2274 Potential Sec. Vulnerability in rpc.ttdbserver (rev.5)"
- Previous message: Marc Brevoort: "It's about money so let's be paranoid"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
