Netmasks not getting set with IPMP

From: Rodrick R. Brown (rrbrown@dcas.nyc.gov)
Date: 12/21/02 

From: "Rodrick R. Brown" <rrbrown@dcas.nyc.gov>
Date: Sat, 21 Dec 2002 20:36:31 GMT

I'm trying to configure IPMP on one of my servers but for some reason my
netmask keeps getting set to ff000000 no matter whats set in /etc/netmasks
it should be set to ffffffe0 but not sure what's going on anyone can give me
a quick insight to what's up I would really appreciate it.

My /etc/netmasks file has the following
10.1.1.0 255.255.255.224
10.152.100.0 255.255.255.224

ifconfig output
ce0: flags=1000842<BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER>
mtu 1500 index 2
        inet 10.152.100.52 netmask ff000000 broadcast 10.255.255.255
        ether 0:3:ba:1d:54:5b
ce0:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.152.100.50 netmask ff000000 broadcast 10.255.255.255
ce3: flags=1000842<BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER>
mtu 1500 index 3
        inet 10.152.100.53 netmask ff000000 broadcast 10.255.255.255
        ether 0:3:ba:1d:53:de
ce3:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 10.152.100.51 netmask ff000000 broadcast 10.255.255.255
dman0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 4
        inet 10.1.1.2 netmask ffffffe0 broadcast 10.1.1.31
        ether 0:0:be:a8:75:98

/etc/hostname.ce0
oak-ce0 netmask + broadcast + group production deprecated -failover up
addif oak netmask + broadcast + failover up

/etc/hostname.ce3
oak-ce3 netmask + broadcast + group production deprecated -failover up
addif oak-dum netmask + broadcast + failover up

uname -a
Generic_112953-02 sun4u sparc SUNW,Sun-Fire-15000
All Recommened patches up to 12/15/02 running Solairs 8/02

Rodrick R. Brown
rrbrown[at]dcas.nyc.gov
phusnikn[at]cynikal.net

Relevant Pages

  • problem with sharing internet
    ... fxp0: flags=8843mtu 1500 ... netmask 0xffffff00 broadcast 192.168.0.255 ... any via fxp0 ...
    (freebsd-questions)
  • Re: read hang on datagram socket
    ... I've reduced the problem down to the following C program that hangs on 5.4 but works fine on 6.0 and 4.11. ... lnc0: flags=108843mtu 1500 ...
    (freebsd-hackers)
  • route between LAN, DMZ and INET
    ... private LAN, my DMZ and the Internet. ... dc0: flags=8843mtu 1500 ... inet 127.0.0.1 netmask 0xff000000 ...
    (freebsd-questions)
  • mpxio with iscsi disks
    ... mtu 1500 index 2 ... inet 10.100.100.16 netmask ffff0000 broadcast 10.100.255.255 ... The same iscsi target disk is visible throught both paths. ...
    (SunManagers)
  • Re: ShareFS between RPC and iyonix
    ... No remote nets ... mtu 1500 ... inet x.x.x.x netmask 0xffff0000 broadcast 169.254.255.255 ...
    (comp.sys.acorn.networking)