Re: vnc over multiple ssh tunnels?
- From: "Mike" <mike.martin3@xxxxxxxxxxx>
- Date: Thu, 06 Aug 2009 21:01:21 GMT
Oops let me correct the plink command, it would be:
plink -N -PW MyPa$$w0rd -L 127.0.0.1:5900:windowsbox1ip:5900
plink -N -PW MyPa$$w0rd -L 127.0.0.1:5901:windowsbox2ip:5901
"Mike" <mike.martin3@xxxxxxxxxxx> wrote in message
First, what you'll need to do is set up both windows boxes with 2
different ports for VNC. Make one port 5900 and the other port 5901.
I assume you have a ssh server set up at home (you must have this set up).
Then issue the following commands from your box at work (I used plink for
plink -N -PW MyPa$$w0rd -L 127.0.0.1:5900:127.0.0.1:5900
plink -N -PW MyPa$$w0rd -L 127.0.0.1:5901:127.0.0.1:5901
This will create two separate tunnels and you can connect to both of your
windows boxes at home (at the same time if you want to). On your VNC app,
for the IP address, you'd type:
"Wes" <clutch@xxxxxxxxx> wrote in message
I have two windows boxes I'd like to get to using vnc. From where I want
to access them
port 22 is open but most other ports I've tried are closed. Some of the
ports, I already have tied up.
Anyway, can I port tunnel to one box on my home network and then tunnel
again to another
box on my home network so I can use port 22 for any box on the network.
I am using tightvnc, have cygwin on all boxes, and usually use Putty to
- Prev by Date: Plink -pw Password Authentication
- Next by Date: Re: intranet access from home computer via ssh
- Previous by thread: Re: vnc over multiple ssh tunnels?
- Next by thread: Plink -pw Password Authentication