Long time to auhenticate

Below is a snippet from my putty event log. It's taking a relatively
long time to establish the connection and I'm trying to find out why. It
used to to take 1-2 seconds. Now sometimes it exceeds 10 seconds. The
network has not changed.

2007-03-14 16:42:25 Initialised AES-256 SDCTR client->server encryption
2007-03-14 16:42:25 Initialised HMAC-SHA1 client->server MAC algorithm
2007-03-14 16:42:25 Initialised AES-256 SDCTR server->client encryption
2007-03-14 16:42:25 Initialised HMAC-SHA1 server->client MAC algorithm
2007-03-14 16:42:25 Pageant is running. Requesting keys.
2007-03-14 16:42:25 Pageant has 1 SSH-2 keys
2007-03-14 16:42:34 Trying Pageant key #0
2007-03-14 16:42:35 Sending Pageant's response

Notice the 9 second delay between 16:42:25 and 16:42:34. What would
cause such a delay? Is this something happening on the server or the
client? I suspect it's on the server.
.

Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... Funny thing is that I have had this ISP for 8 years and it has always been ... It looks like when you last ran CEICW, you set the ISP's mail server to: ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect client to server 2003
    ... you need to reconfigure the IP schema of your SBS ... On the SBS 2003 Server open the Server Management console. ... On the Connection Type page, click Broadband, and then click Next. ... Alternate DNS server, type the IP addresses that are provided by your ISP ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... port on the old router so I now have a segregated WLAN. ... be sure you do not enable any DHCP server in internal network. ... On the Connection Type page, click Broadband, and then click Next. ... On the Network Connection, You must enable and configure the network ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... it certainly appears to be something about the SBS configuration. ... Meridian.local Ethernet adapter Local Area Connection: ... Windows SMALL BUSINESS SERVER 2003 Windows IP Configuration ... 192.168.254.254) directly to a port on the router and then ...
    (microsoft.public.windows.server.sbs)
Quantcast