ssh and fedora core 4



Hi,

I have a fedora core 4 box. We installed pam_abl and everything works fine. We can connect to it from the same subnet just fine. However when we try to connect to it from a different subnet we cannot.

So in summary if we leave the sshd_config port=22 everything works. if we move the port number to say 2200 or something else.

The connection gets a "connection refused" right away. Any ideas what may cause this or were to start looking. It is a stock FC4 install except for the pam_abl module reciently added.
.



Relevant Pages

  • Problems with Listener after patching to 10.2.0.2.0
    ... I've just done a clean install of 10.2.0.1.0 on a 2-node RedHat Linux ES 4 RAC. ... Node connectivity check passed for subnet "10.231.175.0" with nodeorarac-02,orarac-01. ... Suitable interfaces for the private interconnect on subnet "10.231.175.0": ... valid_lft forever preferred_lft forever ...
    (comp.databases.oracle.server)
  • Re: Setting up multi-site 2KAD in office with no router
    ... >working and then build the second server just as a W2K ... Install this at the second site and DCPromo ... >>192.168.n.0 where 'n' is the site number and subnet ... >>installed by that so I installed DNS. ...
    (microsoft.public.win2000.active_directory)
  • Re: SBS2000 NIC Replacement -(External)- best practices?
    ... subnet and gateway of the old external nic. ... binding order or other critical settings. ... >03) install new External NIC ...
    (microsoft.public.backoffice.smallbiz2000)
  • Setting up multi-site 2KAD in office with no router
    ... As for building the servers. ... Install this at the second site and DCPromo ... >192.168.n.0 where 'n' is the site number and subnet ...
    (microsoft.public.win2000.active_directory)
  • Re: Adicional Domain Controller
    ... This DC is DNS Server and DHCP Server. ... > using the subnet 192.200.106.xxx. ... >> You can also install DHCP during the setup, ...
    (microsoft.public.windows.server.setup)