Core dumping for sshd

Sshd core dumps on my SunOS solaris6 5.8 box ever since i installed
openssh-4.2p1 and openssl-0.9.8. The error message was Abort (core
dumped). I ran a strings and truss on the dump and file to see where it
was terminated. This is an abbreviated version when i ran truss on the
file. Please help. Reinstalling does not seem to work.

2315/1: 0.1398 sigaction(SIGPIPE, 0xFFBED658, 0x00000000)
= 0
2315/1: new: hand = 0x00000000 mask = 0 0 0 0 flags =
0x0000
2315/1: 0.1401 sigaction(SIGABRT, 0x00000000, 0xFFBEDA00)
= 0
2315/1: old: hand = 0x00000000 mask = 0 0 0 0 flags =
0x0000
2315/1: 0.1402 llseek(0, 0, SEEK_CUR)
= 1696803
2315/1: 0.1403 sigaction(SIGABRT, 0xFFBED8D0, 0xFFBED950)
= 0
2315/1: new: hand = 0x00000000 mask = 0 0 0 0 flags =
0x0012
2315/1: old: hand = 0x00000000 mask = 0 0 0 0 flags =
0x0000
2315/1: 0.1404 sigfillset(0xFF0428D0)
= 0
2315/1: sigmask = 0xFFFFFFFF 0x00001FFF 0 0
2315/1: 0.1405 sigprocmask(SIG_UNBLOCK, 0xFFBED980,
0x00000000) = 0
2315/1: set = 0x00000020 0 0 0
2315/1: 0.1406 getpid()
= 2315 [2314]
2315/1: 0.1406 kill(2315, SIGABRT)
= 0
2315/1: 0.1407 Received signal #6, SIGABRT [default]
2315/1: siginfo: SIGABRT pid=2315 uid=0
2315/1: *** process killed ***

.

Relevant Pages

  • Re: best way to change string gauge to thicker?
    ... > should I adjust the truss and the bridge first and then throw em on, ... >>>strings off and tighten the truss rod before i put the new ones on? ... This is because the new strings will almost ... >> certainly be too thick for the current size of the nut slots. ...
    (alt.guitar)
  • Re: best way to change string gauge to thicker?
    ... But should I adjust the truss and the bridge first and then throw em on, ... Should I strip the old strings off and tighten the truss rod before i put the new ones on? ... This is because the new strings will almost certainly be too thick for the current size of the nut slots. ...
    (alt.guitar)
  • re:Weird guitar...
    ... When I added a back truss ... connecting the back piece which is made of steel strip 2x16" bent at ... the end to hold the strings, connected to the neck truss via a screw ...
    (sci.electronics)
  • Sshd core dumping
    ... I ran a strings and truss on the dump and file to see where it ... Prev by Date: ...
    (comp.unix.solaris)
  • Re: Core dumping for sshd
    ... I ran a strings and truss on the dump and file to see where it ... you can run sshd in debug mode (ie ... Good judgement comes with experience. ...
    (comp.security.ssh)