Re: Lost ability to Putty via internet, but can via lan

md_at_holisticgp.com.au
Date: 11/28/05 

Date: 27 Nov 2005 21:32:45 -0800

Thanks...further details:
Server: running linux red hat version 8. Static ip 192.168.1.111. No
firewall at all

DSL Modem/router - Linksys wag54g with port forwarding to port 22 on
192.168.1.111.

DSL ip of this dsl router is also static - say 234.45.67.89 for
arguments stake. Standard firewall setting

Remote station: attempting to log in using putty via 234.45.67.89:22
but getting 'fatal error . . . connection timed out'

However locally: can use Putty via any local computer on the
192.168.1.x network to log into the 192.168.1.111 computer either via
192.168.1.111:22 or via 234.45.67.89:22

Richard E. Silverman wrote:
>
> I'm afraid there is nowhere near enough detail here to help you.
>

Relevant Pages

  • Re: Firewall/Router
    ... Leaving NAT on the DSL router and putting the firewall between it and the ... I assumed it was because the server had the ...
    (microsoft.public.windows.server.sbs)
  • Re: Firewall/Router
    ... Firewall WAN: ... With DHCP only on the SBS ... Various NAT was set up on the DSL Router, and exactly the same port forwarding was set up on the firewall, only it was looking at the source and destination IPs, so if the inpbound data in the firewall was being sent to 192.168.16.5:1000 it was then forwarded to 192.168.16.5:1000 by the firewall, the IP must be specified). ... I assumed it was because the server had the wrong IP address for the gateway. ...
    (microsoft.public.windows.server.sbs)
  • Re: need help for setting SSH Server for Windows XP
    ... I can even connect with Putty using 127.0.0.1 as IP address. ... In my windows firewall proper ports are opened. ... Changing from port 22 to ports 80, 443 also doesn't give any results. ... It is *NOT* a valid test to call the SSH server PC from another ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Install nightmare
    ... the LAN of your DSL router, the WAN of your Firewall device and your SBS LAN ...
    (microsoft.public.windows.server.sbs)
  • Re: IP phone setup remote location
    ... here, firewall here, dsl router here, these three at the remote location ... or it could be the tunnel. ... If the same provider is servicing both locations, ...
    (comp.dcom.sys.nortel)