Re: ssh over router?

From: Marmos (Marmos_at_gmx.ch)
Date: 09/29/03


Date: Mon, 29 Sep 2003 18:29:01 +0200

Hi Tom,
I understood you this way, that you would be able to login from your lan
over the router
to any ssh-server in the www, but not properly the way around from outside
to inside.

I think you have to configurate the router by "port forwarding".
This means, if a client from the www wants to connect to your server the
router knows that by using
a port, f.eg. port 22, the client wants to access to your server ( f.eg:
192.168.1.1 ).
At using an other ssh-router you had to route over a second port (23) to
this server (192.168.1.2 ).
Otherwise the request would go the same way to the first server.
Read in the manual accoring port forwarding.

I hope i was able to give you a small hand you are able to cope with these
short
explaination.

Regards,
Martin

"Thomas Werth" <werth@cyber-ideas.com> schrieb im Newsbeitrag
news:XsXdb.181457$hd6.2306128@news.chello.at...
> hi i have a problem. i purchased following router:
> Acer WLAN Broadband Router/Access Point / 802.11b (AG.WL11B.RU3)
>
> this router has 3 10/100 ports, an access point and a router all in one.
it
> routes both wireless as well as cabeld clients.
>
> my router is connected to a cable modem and has a static ip address. now
if
> i want to connect to a client within my LAN from the internet obviously i
> have to go over my router with the static ip.
> can i somehow pass my router an argument (ie an ip address of a client
> machine within my LAN) so it passes the ssh request to the proper machine?
>
> i would be very thankful if anyone could give me a hand : )
> tom
>
>



Relevant Pages

  • Re: Remote desktop & Netgear router
    ... if you can connect to the PC from another PC using the "private LAN IP address" over your ... local LAN then Remote Desktop is obviously setup right and working. ... The issue then is the port forwarding on the router. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Remote mvBase Access...
    ... and straightforward - requires no software installatiom on the client (it ... >>Depends on the firewall/ router, so I can't really comment specifically. ... > them through installation of VNC or similar on their machine. ... IIRC on port 5500). ...
    (comp.databases.pick)
  • Re: SBS2K3 and 2003 term server problem since SP1 upgrade
    ... any of the client except the client inside the lan. ... we only know you can access the TS box from the LAN ... Please understand if you put the external NIC to router directly, ... I will be here waiting for your updates. ...
    (microsoft.public.windows.server.sbs)
  • Re: [Full-Disclosure] Microsoft urging users to buy Harware Firewalls
    ... I have a 5 machine LAN here at home and I have Astaro Security Linux ... >>I agree with Microsoft's recommendation for a hardware firewall on all ... Then the user finds about port forwarding, and as soon as the user has ... > at the router and cannot get to the computers in the local network. ...
    (Full-Disclosure)
  • Re: Remote desktop & Netgear router
    ... you can get that quite easily by going to either of these sites from a PC on the LAN ... In your case it would be the IP address of the WAN port of the Netgear router. ...
    (microsoft.public.windowsxp.work_remotely)