Re: ssh through second network card using PUTTY

From: Darren Dunham (ddunham@redwood.taos.com)
Date: 02/26/03 

From: Darren Dunham <ddunham@redwood.taos.com>
Date: Wed, 26 Feb 2003 07:05:48 GMT

Tony <tonyl@tnarobag.com> wrote:
> G'day all,

> I am using Putty and want to open a ssh using a second network card,

> I can find no settings whereby the second card can be selected.

> I have the following settings
> Running Win2k
> Ethernet adapter Local Area Connection 2:

> Connection-specific DNS Suffix . :
> IP Address. . . . . . . . . . . . : 192.168.2.170
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.2.250

> Ethernet adapter Local Area Connection:

> Connection-specific DNS Suffix . :
> IP Address. . . . . . . . . . . . : 192.168.2.171
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.2.250

If this were Solaris, I'd tell you that such a network configuration is
not supported (without some more work).

If both cards are on the same subnet, why do you care which one is used?

If the cards do different things, why are they on the same subnet? 

-- 
Darren Dunham                                           ddunham@taos.com
Unix System Administrator                    Taos - The SysAdmin Company
Got some Dr Pepper?                           San Francisco, CA bay area
         < This line left intentionally blank to confuse you. >

Relevant Pages

  • Re: A stuck system
    ... It will not respond to network input on the em0 card... ... could you try putting a second network card in the box? ... or plug in some usb device and see if there is any daemon ...
    (freebsd-current)
  • Two networks in the same server.
    ... I need to setup a second network card in a server so that we can back up a ... second server on a seperate network. ... I have configured the second card on ...
    (microsoft.public.win2000.networking)
  • Multiple Network Cards
    ... I want to add a second network card to a FreeBSD 4.10p4 box. ... card has an address 192.168.123.99 (xl0). ...
    (freebsd-stable)
  • NIC CARD
    ... I need help configuring my second network card on one of my RS/6000. ... second card to a different IP and hostname, it makes that hostname the name ... I want POD to remain the name. ...
    (comp.unix.aix)
  • Re: HP Laserjet 2550 Configuration
    ... Most likely you are not on the same subnet. ... For example if ipconfig returns the ip adress of your computer as 169.254.1.10 then assign the printer the address 169.254.10.25 providing that 25 is not being used by anything else in the network. ... The light is on the printer card. ... I've followed the manual and running software and drivers to set it up will be futile unless this card can be located. ...
    (comp.periphs.printers)