Re: Solaris NIS+ authentication and ssh 3.1.0

From: Ken Arnold (bkarnold@cbu.edu)
Date: 01/31/02

  • Next message: Richard Houston: "Public key auth between ssh and openssh"

    From: bkarnold@cbu.edu (Ken Arnold)
    Date: Thu, 31 Jan 2002 17:47:26 GMT
    
    

    On Wed, 30 Jan 2002 02:10:25 GMT, "Nico Kadel-Garcia"
    <nkadel@bellatlantic.net> wrote:

    >
    >"Neil W Rickert" <rickert+nn@cs.niu.edu> wrote in message
    >news:a36piv$t0m$1@husk.cso.niu.edu...
    >> bkarnold@cbu.edu (Ken Arnold) writes:
    >>
    >> ># consult /etc "files" only if nisplus is down.
    >> >hosts: files dns nisplus [NOTFOUND=return]
    >>
    >> This is a tad off topic. But please change that hosts line, and put
    >> "dns" last -- especially if you are doing any significant amount of
    >> email. Otherwise you will bounce mail with permanent host lookup
    >> failures from nisplus, when you should be retrying due to a temporary
    >> lookup failure from dns.

    The only host information we have in NIS+ is the host information for
    our NIS+ clients and for our printers. All the other host information
    is in DNS. It doen't make sense to put dns last since that is where
    the vast majoriity of the host information is located.
    >
    >Better yet, remove nisplus entirely: use a local caching server for DNS if
    >you need to, but use DNS for what it was intended for instead of tacking NIS
    >craziness on top of it, and the need to make sure the NIS+ is synchronized
    >with the DNS for your local network.

    By putting it last I am in effect eliminating it because the only
    thing it will be used for is printer information.
    >
    >
    >



    Relevant Pages

    • Re: Web Site Mystery
      ... host our own web site at this location. ... So in our DNS setup, there is a pointer to the ip address of the ... Run an ipconfig /all on your server and you'll see the ... www.europacrown.com don't work from our corporate network. ...
      (microsoft.public.windows.server.general)
    • Re: Underscore in IIS 6 Host Header definition
      ... The RFC that you referenced does not define the standard for the DNS ... An underscore is not valid in a host. ...
      (microsoft.public.inetserver.iis)
    • Re: Retardedness
      ... have not written any reverse DNS code. ... Begins an asynchronous request for IPHostEntry ... information about the specified DNS host name. ... GetHostAddresses: Returns the Internet Protocol addresses for ...
      (alt.os.windows-xp)
    • Re: [SLE] Help with NFS
      ... system you might want to use either DNS or NIS. ... I cannot ping from either host to the other. ... >Assuming that I have a problem on my DNS or my host tables, ...
      (SuSE)
    • Re: Unable to sentd email to certain domains...
      ... Think of reverse DNS this way. ... When you ping a host by name ... they often don't have a reverse DNS set up. ... provider should be able to set this up no problem. ...
      (microsoft.public.exchange.admin)