Re: anyone help?

Me_at_home.here
Date: 08/14/05 

Date: Sun, 14 Aug 2005 16:30:38 GMT

On Sun, 14 Aug 2005 10:01:18 GMT, "Jeremy Watts"
<jwatts1970@hotmail.com> wrote:

>I assume a virus is to blame, or some other type of malicious program. My
>question is what can I do about it? I have tried re-installing the system
>disks, but on switch on it isnt reading or responding to the CD drive.
>
>Is there some sort of software I can use that will help?

   Have a look at this pages -recommended in alt.comp.virus:

http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm

  You will find more help in the newsgroup mentioned above.

  Geo

Relevant Pages

  • Re: shut down
    ... When responding to posts, please "Reply to Group" via your newsreader so ... Newsgroups: microsoft.public.windowsxp.hardware ... for example this shutdown row: ... shutdown.exe directly for more information about the switch. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Switch randomly drops connection to port
    ... creation of the Google Groups interface. ... on this but $1700 for a Catalyst switch may be a cheaper solution. ... interface telling you about the state of the ports which have the problem? ... that the server is responding. ...
    (comp.dcom.sys.cisco)
  • Fibre connectivity qla 2342 - brocade - 6120
    ... If I physical connect the server directly to the controller on the 6120 I can see the slices that I've created. ... However if I put the brocade between the server and the array, the server see's no disks. ... The brocade is working and works with other servers, my thinking is that it's because of the different fibre topology and that direct its point to point and via the switch its a loop. ... I then loaded the, Solaris SPARC Driver 5.03, so have tried making changes in the /kernel/drv/qla2300.conf but these do not take effect, even after a boot -r. ...
    (comp.sys.sun.hardware)
  • Re: Multiple harddisks in one pc
    ... I heared that in this case these devices get power over the scsi bus ... mechanical switches for your disks: There are 2 supply voltages (5V, ... 12V) on the power connector that must both be disconnected to switch off ...
    (comp.periphs.scsi)
  • Fibre connectivity - Qlogic - brocade - 6120
    ... If I physical connect the server directly to the controller on the 6120 I can see the slices that I've created. ... However if I put the brocade between the server and the array, the server see's no disks. ... The brocade is working and works with other servers, my thinking is that it's because of the different fibre topology and that direct its point to point and via the switch its a loop. ... I then loaded the, Solaris SPARC Driver 5.03, so have tried making changes in the /kernel/drv/qla2300.conf but these do not take effect, even after a boot -r. ...
    (comp.sys.sun.admin)