Re: Hard Drive Destruct System?

From: E. (bellyup_at_thebar.now)
Date: 11/26/04 

Date: Fri, 26 Nov 2004 19:41:44 GMT

mike3 wrote:
> Hi.
>
> Would this make a good mechanism to securely destroy a hard drive?
>
> 1. Crash the heads into the platters with the drive at top speed
>
> 2. Seek them from one edge of the platters to the other back and forth
> to \
> ensure good grinding
>
> 3. Pump a concentrated hydrogen/oxygen mix into the hard drive platter
> chamber
> while the heads are grinding away.
>
> Would the heat from the grinding be enough to ignite the H2/O2 mix and
> ensure that data can't be recovered? Would this mechanism be good
> enough to keep copies of a large company's trade secrets from a
> competing large company?

Open top of drive. Place open drive in plastic container. Pour in
Coca-cola so drive is immersed. Leave for 4 days.
E.

Relevant Pages

  • Re: 2GB CF card vs. 4GB Microdrive....
    ... The biggest vulnerability with any hard drive is the delicate gap between the heads and the surfaces of the platter- if the unit has powered down then the heads are already in contact with the platters in a reserved area, and are held against the surface with a force that might surprise you. ... I have not a clue whether a MD has the same insides as other hard drives, nor whether the heads were doing the reseek dance while they bounced about, but my guess is my hammer is ...
    (rec.photo.digital.slr-systems)
  • Re: Why magnetic drums was/are worse than disks ?
    ... I already told you that the maximum number of disk platters isn't decreasing much at all. ... There's nothing about thermal expansion that would 'encourage' reductions in platter count: some desktop drives are being made with fewer platters (and heads) so that they can be manufactured more cheaply - in fact, some drives have been made that use only one side of one platter. ... Split the difference to make a round number, and say that the multi-head assembly length can vary with respect to the 'pencil' length no more than +/- 0.000001 inch, at least if you want track density comparable to a contemporary disk's. ...
    (comp.arch)
  • Re: Hard Drive Destruct System?
    ... Crash the heads into the platters with the drive at top speed ... Modern hard drives have a very hard and smooth ...
    (comp.security.misc)
  • Re: Hard Drive Destruct System?
    ... Crash the heads into the platters with the drive at top speed ... Hard drives have gotten a lot ... >classic paper on removing information from computer disks. ...
    (comp.security.misc)
  • Re: replacing head assy in a hard drive
    ... success are about as close to zero as the odds of winning the lottery ... it seemed to be awfully close to the platters for comfort. ... >> The other problem was that when I slid the heads off the platters, ... > live under the laws of justice and mercy." ...
    (sci.electronics.repair)