Re: tcp 20471 probe?

From: C Colon (foobar@asia.com)
Date: 12/31/01 

From: foobar@asia.com (C Colon)
Date: 31 Dec 2001 01:36:37 -0800

>
> I also see that the -source- TCP port (the port number
> on the end trying to make the connection) is, in each case, one of
> 20471, 20472, or 21472.
>
All three port numbers above are in the unassigned category - Hence it
is doubtful that a genuine application is trying to talk to your
machines.

Regards
C:\>
-----------------------------------
Kindly post replies to the newsgroups itself

Relevant Pages

  • Re: Correction
    ... Normally to physically disconnect is just a matter of reaching for the ... >> I have an ADSL connection which polls my computer from time to time, ... > disallow each and every port with Windows Firewall? ...
    (microsoft.public.windowsxp.messenger)
  • Re: Using Remote Desktop From an SBS Domain
    ... when you tried to RDP while attached directly to a port on your router? ... Internet to initiate an IP conversation with your computer. ... This situation is different than if you ran your own NAT connection sharing ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... it certainly appears to be something about the SBS configuration. ... Meridian.local Ethernet adapter Local Area Connection: ... Windows SMALL BUSINESS SERVER 2003 Windows IP Configuration ... 192.168.254.254) directly to a port on the router and then ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... it certainly appears to be something about the SBS configuration. ... Meridian.local Ethernet adapter Local Area Connection: ... Windows SMALL BUSINESS SERVER 2003 Windows IP Configuration ... 192.168.254.254) directly to a port on the router and then ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Desktop Connection not working
    ... I have DSL internet connection. ... and opened up port 3389 inbound & outbound. ... If its DSL then its possible the DSL modem is also a router. ... So in that case you either need to open TCP Port 3389 through the ...
    (microsoft.public.windowsxp.work_remotely)