Re: Sonicwall PRO 3060 VPN not Connecting to internet

Am Fri, 18 Jul 2008 06:42:02 -0700 schrieb SallyBridges:

The sonic wall firewall allows you to configure the sonicwall global
vpn client from the actuall firewall

ok, but I made the experience sonicwall is crap.

split tunnels is therefore setup on the sonicwall firewall and this
automatically pushes to the client

Usually if the tunnel is established you get an valid spd entry and only
those packets will be send encrypted (depends on your config)

the dns entries when connected are the same as our lan dns entries and
these are working
on the lan side the gateway is the main work gateway to the internet and
works from office lan but not the vpn client
dns resolves but when attempting to go out on to the internet then a
tracertout our ping will time out

Sounds like your packet goes through the tunnel, check your phase2 policy.

cheers
.

Relevant Pages

  • RE: XP messenger not receiving messages
    ... Regarding to this case i asked Cisco if they had any problems in they ... "Micosoft Instant messenger does not work through the tunnel, ... Microsoft has confirmed that this is a problem with Windows messenger. ... > same problem but i need my Cisco vpn client so i can connect to headoffice, ...
    (microsoft.public.windowsxp.messenger)
  • Re: Sonicwall PRO 3060 VPN not Connecting to internet
    ... works from office lan but not the vpn client ... Sounds like your packet goes through the tunnel, ... translation - This then magically makes it all work ... Enter Inbound Interface: In this example, X1 (note this is your WAN ...
    (comp.security.firewalls)
  • RE: [fw-wiz] Pix VPN endpoint and split-tunnel
    ... this is for a business partner network ... Another reply I got here from Simon expressed the possibility that PIX ... even when the traffic arrives via VPN tunnel. ... of anything the PIX or VPN client do. ...
    (Firewall-Wizards)
  • Re: Can you login after desktop comes up?
    ... The Nortel VPN client that we use has a option for "logoff after connect". ... So The user logs on to the PC with the cached creds, ... get the tunnel established, once the tunnel is up the VPN client logs the ... > I have a unique scenario where I need my users to login (to get their Home ...
    (microsoft.public.windows.server.active_directory)
  • [fw-wiz] Cisco PiX 501 running 6.2 - Defying me for no reason
    ... Well, after researching, configuring, reconfiguring, and just a bit ... the vpn client through the SecureWay firewall. ... The PiX is outside the firewall, on its own line/lines (explained in a ... the vpn eventually) can access the internet fine. ...
    (Firewall-Wizards)