Help Me Open Port 81!

Hi.

Win Server 2003
Dlink 604

In Dlink I see 80 for domain1.com and 81 next to domain2.net under the
virtual server.

In Dlink under filters I see:

port 80: * TCP 80 always
port 81: * TCP 81 always


But SheildsUp tells me that I have all my ports as stealth (including
80) and tells me that 80 is closed.

I am trying to port forward:

domain1:80
domain2:81

I can get to domain1 but not domain2.
I am guessing the fact that sheilds up is telling me is closed is the
problem but I can't seem to figure out how to open it.

Both domains share a ISP assigned public IP and are

192.168.0.5
and
192.168.0.6

on the LAN.

Thanks for your help!























.

Relevant Pages

  • Re: Need help configuring WinVNC access through Dlink 704P
    ... Yes,..the Dlink is set to distribute DHCP addresses. ... Dlink to open ports 5800 and 5900, ... and redirect any requests on those ports to my main desktop PC (IP Address ... > server permissions to any local software firewall you may be running. ...
    (comp.security.firewalls)
  • Re: Port Forwarding on D-Link 704P Router
    ... Hi, I dont have the same router, but they all seam to have the same ... where I would enter those sites and ports... ... > I did enable the ports on the Virtual Server screen in the routers ... > run a software firewall, but am hoping for a hardware solution ...
    (comp.security.firewalls)
  • Re: Port Forwarding on D-Link 704P Router
    ... Hi, I dont have the same router, but they all seam to have the same ... where I would enter those sites and ports... ... > I did enable the ports on the Virtual Server screen in the routers ... > run a software firewall, but am hoping for a hardware solution ...
    (comp.security.firewalls)
  • Re: Port 113 is closed
    ... > I have a Dlink DI-604 and I want to close a few ports. ... Are you using NAT? ... "Es kann nicht sein, dass die Frustrierten in Rom bestimmen, was in ...
    (comp.security.firewalls)
  • Re: Firewall Ports Keep Changing for Exchange
    ... > We have an Exchange 2003 Server running on a GSX Virtual Server. ... > Each night the virtual server is stopped for backup and restarted. ... > found to be blocked by the firewall on the Exchange Server. ... > the 1400 ports. ...
    (microsoft.public.security)