Re: Watchguard Firebox Peak - Force traffic through a specific connection?

I love solving my own problems... :)
We setup a route to the host through a specific pipe (Cable Modem),
and all traffic went through properly.

-Tim



On Mar 10, 10:33 pm, "Barule Technologies" <toa...@xxxxxxxxx> wrote:
Any takers?

-Tim

On Mar 8, 12:41 am, "Barule Technologies" <toa...@xxxxxxxxx> wrote:



Looking for some help with a Watchguard Firebox X Peak 5500 e-Series
firewall. I've just started working with a new company, and they have
the 5500 on their network. Attached to the box are a T-1 Line, Cable
Modem connection, and DSL connection. They are configured for outbound
connections in a round-robin mode, which I'm told is for load
balancing.
There is a web-based app that has some session-specific components,
which often loses the connection and resets the client session, as
when this happens, the system typically grabs a different circuit than
what was originally being used.
We're looking to force all traffic to this resource, which is a single
host on port 80, through one pipe only. Prior to my arrival, some
attempts were made to Deny access to the host on port 80 to two of the
connections, but it did not work. I don't know if the config on that
attempt was correct, as I didn't see it.
Thanks.

-Tim- Hide quoted text -

- Show quoted text -


.

Relevant Pages

  • Re: Connect to remote machine over the internet
    ... > at the host end, which in most cases is dynamically assigned. ... Double-click Make New Connection for the New Connection Wizard. ... Select the modem from the list of devices, ... >> I am evaluating Windows XP remote connection software for connecting ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Remote Desktop Connection
    ... I am still having connection problems. ... Since I have DSL at the host I downloaded and installed on the host the ... Its possible the DSL modem is also a router. ... If so you need to put the modem into a bridge or pass through mode. ...
    (microsoft.public.windowsxp.network_web)
  • Re: ppp: a couple of questions, if you please.
    ... > modems demand dial ppp with idle time setting to drop the connection ... > and either host could initiate dial and bring up the link. ... But it could happen to SCO as well. ... > and their dialer could automatically use the next available modem to ...
    (comp.os.linux.networking)
  • demand dial ONLY for one host/network
    ... a single host or network; I haven't found any examples of people doing ... however, through a PPP connection. ... add a host route to make sure the traffic for that host goes over the ... modem, and all is good. ...
    (comp.protocols.ppp)
  • understanding chkrootkit: sshd section
    ... Rhosts Authentication disabled, originating port will not be trusted. ... Secure connection to %.100s on port %hu refused%.100s. ... Warning: Remote host refused compression. ... Received RSA challenge from server. ...
    (comp.os.linux.security)