Re: IP conflict in my network



In article <1165374705.291574.32470@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
mailcmw@xxxxxxxxx says...
I dont know if i fully agree with the lease running out while the
machines are turned off

If a lease was to run out while a pc was turned off and then
consequently this lease was given to another computer, the original
computer when it is turned on should be requesting a new lease as it
knows that its lease has run out

Below is a url to dhcp guide

http://www.tcpipguide.com/free/t_DHCPLeasesLeaseLengthPoliciesandManagement-3.htm

It is still obviously a good idea to work out a good lease time that
suits your needs but the dhcp server should handle the machines leases
running out while turned off without problems

I would be looking to see that you dont have any pcs or printers or any
other devices with static ip addresses and, if you are still having
problems i would look at your pool of addresses and see if it is big
enough for all your pcs and devices

Also I would check to see that you dont have 2 devices setup for dhcp,
ie if you have a broadband modem/router it would most likely be by
default setup for dhcp.

There can be weird issues with Windows and DHCP.

I work from home, and use a software VPN to connect to work. At night, I
turn off the computer and the router (Linksys BEFSX41, the VPN on it is
no longer used) and the modem (Motorola 5120). The router is set up with
standard DHCP, using 192.168.3.xxx. The usual .1.xxx and .2.xxx
addresses are set up for my backup DSL connection which has it's own
modem and router (an identical Linksys BEFX41, but configured
differently due to issues trying to communicate with the Siemens 4100
DSL modem). I don't use both simultaneously, but wanted to keep the
routers separate.

For weeks, I had issues where the computer (running Win2K) would sit at
'Preparing Network connections' for as long as 2-3 minutes. I originally
though this was due to it being part of a corporate domain and trying to
look for something.

Also, every once in awhile, my VPN would drop and pop up the VPN login.
A clue came when I looked at the VPN log, and saw a note that it had
dropped because the IP address had changed to 0.0.0.0. I also realized
that this once happened exactly 24 hours after having turned on the
computer at an odd time one day. The router is set to a standard 24 hour
lease.

I changed the computer to use a fixed IP (outside the DHCP range), and
all my problems disappeared. It boots up fast and hasn't dropped the
VPN.

--
If there is a no_junk in my address, please REMOVE it before replying!
All junk mail senders will be prosecuted to the fullest extent of the
law!!
http://home.att.net/~andyross
.



Relevant Pages

  • Re: DHCP lease and dhclient.eth0.leases.
    ... It has two entries. ... gets me a new lease. ... Netgear router was failing to properly negotiate a new lease on its own ... a router or a real DHCP server on you LAN? ...
    (Debian-User)
  • Re: ip changed after sometime using dhcp
    ... >makes my ssh die. ... >correct or is the common way of DHCP. ... reasons for increasing the lease. ... Maybe there's a vpn solution that could work for you. ...
    (Debian-User)
  • Re: DHCP on Solaris: How to renew lease when VPN is active
    ... The problem is that the IP lease is NOT being renewed before the ... If I reboot the machine, DHCP works, an IP is obtained. ... I start VPN in the following way. ... If I now issue a DHCP extend command, ...
    (comp.unix.solaris)
  • Re: dhclient in 6.0
    ... Not really, no, except when DHCP options appear to turn off IPv4LL, or ... I think it's pretty obvious you have a rogue client ... if there was a prior lease matching the ... Ironically, ISC DHCP was built from this mindset, from what I read. ...
    (freebsd-stable)
  • Re: IP address lease not recognized
    ... > I presume that I must change something to do with the lease. ... > another beginning I.P. address in the Router. ... > The IP address lease 192.168.1.100 for the Network Card with network ... Do you really need DHCP? ...
    (microsoft.public.win2000.general)