Re: Watchguard SOHO 6
- From: Peter Georgeu <banxtry@xxxxxxxx>
- Date: Sat, 3 Jun 2006 20:47:32 -0700
In article <rChgg.130901$F_3.63453@xxxxxxxxxxxxxxxxxxxxxxxxxx>, xr793
@hotmail.com wrote...
I have a Watcguard SOHO 6 that is not pulling a DHCP address from my DSL
modem. I am using PPPOE, once the connection is established the firewall
should get a DHCP address from my ISP. I have tried this firewall with a
cable modem with the same effect, I have updated the firmware to the latest
6.4.1 3-25-05, I have even went as far as to downgrade then upgrade the
firmware. I have ftp'd to the box and deleted the wg.cfg file, and
re-flashed the firmware, still no luck.
This is as far as I ever get with DHCP or PPPOE:
External Network
Mode DHCP Client
IP Address 0.0.0.0
Subnet Mask 255.255.255.0
Gateway 0.0.0.0
MAC 00907F-13D963
Just for the hang of it, what happens if you change on both the main
computer and the Soho 6 from auto negotiate to 10 Mb/sec half duplex in
both cases?
{eter
.
- References:
- Watchguard SOHO 6
- From: JeffD
- Watchguard SOHO 6
- Prev by Date: Re: Watchguard SOHO 6
- Next by Date: Re: How to block messenger in checkpoint firewall
- Previous by thread: Re: Watchguard SOHO 6
- Next by thread: Re: Watchguard SOHO 6
- Index(es):
Relevant Pages
|
