Netscreen-10 DMZ

Morning Guys & Girls

I hope someone can answer me a quick question.

I am wanting to use the DMZ to test a new 2mb internet connection in my
office. I can't use the trusted port as this is already been used to supply
the office with the current internet connection and mail.

I have configured the DMZ to the settings of the new router and setup a
profile for HTTP Access from my machine to the DMZ.

Problem is it doesn't seem to do anything.

Now maybe I've got the completely wrong end of the stick about the DMZ so
excuse me I have, but I thought you could set it up as an additional access
to the Web / Mail server etc.

The only time I get a entry in the log is if I try to access the Routers IP
address from Internet Explorer....any other traffic I.E. HTTP does not
register and it doesn't even look like it routes towards the DMZ.....no
orange data light on the DMZ on the Netscreen.

Could anybody please point me in the right direction (apart from the door,
lol) on how I can test this New connection with the Netscreens DMZ.

Many Thanks and sorry for the longwinded post.

Dave :)



.

Relevant Pages

  • Re: Netscreen-10 DMZ
    ... I am wanting to use the DMZ to test a new 2mb internet connection in my ... Basically what you're trying to do is a policy route, in other words, to ... NS10's routing table and have it exit out the DMZ interface. ...
    (comp.security.firewalls)
  • Re: Multi nic question and WINS question w/sbs2003
    ... You need a 3rd NIC if you want to create a DMZ with ISA. ... a 3mbps internet connection?) ... Javier [SBS MVP] ...
    (microsoft.public.windows.server.sbs)
  • Re: Extranet access
    ... Before you decide to use MOSS 2007 for your Extranet make sure you check the cost of licences for SharePoint Internet Connection for it. ... WSS FAQ http://www.wssfaq.com ... box and my AD through the DMZ. ...
    (microsoft.public.sharepoint.portalserver)
  • Isa 2004 DMZ
    ... I want to implement a DMZ in our organisation. ... Local LAN: 192.168.0.x, 255.255.255.0 ... Internet connection: public ipaddress. ...
    (microsoft.public.isa.configuration)
  • Re: Exchange 2003 web access through port 443 with Cisco 515E pix
    ... Chad Mahoney wrote: ... >> The reaon I interjected was about the OWA server in a DMZ. ... > rule for http access. ... static translation, did you clear xlate after applying your ...
    (microsoft.public.exchange.setup)