Re: Port Scanning onWAN IP of Speedtouch 530

Νίκος wrote:
In the web panel i see an option called Remote assistance but i have it
disabled..


So you're say that you have disabled remote assist and the ports are still open when you do the scan?

Also i only have 1 host so ok lets sayi forward 21 and 23 ports to
10.0.0.1(localhost) how can i see the output since no program await
input from those forwarding ports?

If the router has a syslog, then you would be able to see traffic being directed to the dummy IP in the DMZ. If you don't have a syslog, you won't see it.

So, I'll assume you only have one machine behind the router connected to it. Then forward the ports to any IP on the router no machine has a possibility of using that IP on the router.

Duane :)


.

Relevant Pages

  • Re: Port Scanning onWAN IP of Speedtouch 530
    ... input from those forwarding ports? ... If the router has a syslog, then you would be able to see traffic being ... directed to the dummy IP in the DMZ. ... My router doesnt have a syslog functionality. ...
    (comp.security.firewalls)
  • Re: 2 pc network - cant see host files from pc 2 on pc 1
    ... Assuming that you have firewall protection via your internet router try ... workgroup because it will be needed for the network to work correctly. ... see if you can access TCP ports 139 and 445 on computer one of which at ... permissions. ...
    (microsoft.public.windowsxp.security_admin)
  • Re: Do I need these services listening?
    ... > first computer that has the modem & router, so I call the second one ... Your Netgear router should connect to the internet. ... Your Netgear router should have the public IP address. ... that if the ports look closed even ...
    (comp.security.firewalls)
  • [VulnWatch] 3Com OfficeConnect Remote 812 ADSL router exposes internal LAN computers ports during ou
    ... ports during outbound and inbound TCP and UDP sessions. ... The 3Com 812 is a widely-deployed router, found in many ISPs ADSL lines. ... for internet access. ...
    (VulnWatch)
  • Re: ATTN Tony Whitmore please
    ... I've not used your router before, but I've just been looking up ... that the router is configured with ports 80 and 23 open on the public ... log into your router using the ARM interface. ... telnet and http access to just your local network. ...
    (comp.security.firewalls)