Re: Ports getting hammered?


"SHRED" <noone@xxxxxxxxxxx> wrote in message
news:7Aduf.6614$JT.1576@xxxxxxxxxxxxx
> Duane Arnold wrote:
>> "SHRED" <noone@xxxxxxxxxxx> wrote in message
>> news:baduf.6609$JT.1968@xxxxxxxxxxxxx
>>
>>>Duane Arnold wrote:
>>>
>>>>"SHRED" <noone@xxxxxxxxxxx> wrote in message
>>>>news:vLcuf.6541$JT.5496@xxxxxxxxxxxxx
>>>>
>>>>
>>>>>I no very little about firewalls.
>>>>>My setup:
>>>>>
>>>>>Cable access
>>>>>4 port SMC Barricade Router
>>>>>2 computers
>>>>>
>>>>>
>>>>>I recently installed ZoneAlarm and it is blocking attempts at port
>>>>>access.


> 7664703 Packet DROPPED: Proto: IP_UDP Flags: 0x0000000a Src:
> 218.19.119.233 Dest: 192.168.123.143 SrcPort: 23421 DstPort: 1689
>

Something on your machine is attempting to connect out over the port most
commonly used for IMAP, a mail protocol.

Probably some spyware calling home.

Your ZA is blocking it, but it's there, and operating.

It may be successfully connecting out on other ports.

Your SMC is likely not configured to block any outbound connections.

-Russ.


.

Relevant Pages

  • Re: Ports getting hammered?
    ... > Something on your machine is attempting to connect out over the port most ... > It may be successfully connecting out on other ports. ... > Your SMC is likely not configured to block any outbound connections. ... Please explain to me how any PFW or any FW solution knows ...
    (comp.security.firewalls)
  • Re: sudo without password
    ... If you're setting up an IMAP ... server, you'd just check off or type in "IMAP". ... the firewall would be completely invisible, ... Thus, even without a single port open, you can use ...
    (Ubuntu)
  • Re: How to turn on iMAP for the iPhone
    ... Blackberry which we got working with exchange ok ... should this be the public one or the internal one for the server ... Port 25 is for SMTP and has nothing to do with IMAP, ...
    (microsoft.public.exchange.setup)
  • Re: How to turn on iMAP for the iPhone
    ... IMAP client will need to connect on port 25 in order to send emails. ... then there is no more that you can do at the server ... IMAPis already enabled on Exchange 2003. ...
    (microsoft.public.exchange.setup)
  • pf firewall config file help needed please
    ... The situation is a fbsd m/c acting as wan gateway/router and mail server for two lan segments. ... The goal is to prevent all clients on the lans from accessing smtp, pop and imap ports except on the gateway box, which will handle all mail for them. ... block in log quick on $IF_LAN_WIRED proto tcp from any to any port ...
    (comp.unix.bsd.freebsd.misc)