Re: D-Link 604 and WallWatcher

From: Sir_George (Sir_George_at_mailinator.com)
Date: 03/30/05 

Date: Tue, 29 Mar 2005 20:19:01 -0700

newsgroup...,

Thanks for the reply. The firmware that I'm using is the latest one
available from D-Link (Version 3.51). So, you may be correct that a later
release of DI-604 has been shipped which allows WallWatcher to work
properly.

In regards to a software firewall being the culprit, I have already replied
to Duane's post that it is not the problem because even with it disabled I
can not get WallWatcher to see the log files. 

-- 
Sir_George
<newsgroups@wallwatcher.com> wrote in message
news:1112143789.621325.36570@g14g2000cwa.googlegroups.com...
> Someone sent me log samples from the DI-604 a couple of months ago, and
> they were used to add WallWatcher support for that router.  That's also
> how I know that the DI-604 can send log records to Syslog port 514.
>
> Before that, other people had told me they could not get SysLog style
> logging to work with the DI-604.  This suggests one of two things:
> there's a newer model available that supports SysLog, while the older
> ones don't; or there's newer Firmware available that adds SysLog to
> models that couldn't do it with previous Firmware.
>
> You may want to check D-Link's website to find out what's available for
> your model of DI-604.
>
> Also, you may want to check Duane's suggestion that a software firewall
> on the computer running WallWatcher is blocking communication. Some
> software firewalls do that silently, without asking you whether the log
> records or WW should be allowed to use the 'net.  The firewalls have
> Configuration sections that let you change the Permissions for specific
> applications, address, and ports.  The Router should be in your
> "Trusted zone", and anything it sends to port 514 should be allowed to
> reach WW.  Also, WW should be allowed to do DNS lookups (port 53) if
> you want to use the "Convert" options on its Logging menu.
>

Relevant Pages

  • Re: D-Link 604 and WallWatcher
    ... You can disregard my prior message about instructions for using Syslog Port ... you may want to check Duane's suggestion that a software firewall ...
    (comp.security.firewalls)
  • Kernel tainting - Binary modules - Proprierty code.
    ... My ticket and Zoom Tech replies follow, ... firmware firmware and flashing it (whilst ... Virtual Server function do the following. ... Running a port scan test all port are shown as ...
    (Linux-Kernel)
  • Re: Solution to an unusual RWW problem
    ... Googling found many probs relating to firmware and the biggest seemed going ... > and 4125 indicated port forwarding at the router and RRAS firewall was ... > state with RWW. ... > * Manually re-entering the port forwarding on the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: IP forwarding feature in Medion Wireless Router 95038 (Aldi)
    ... Firmware Update of the MD 95038 WLAN router. ... This firmware update adds the IP Forwarding configuration function. ... Port forwarding is actually in the firewall page where it says " ...
    (uk.telecom.broadband)
  • Re: That problem I had with broken links in the iTunes store.
    ... Australian firmware did also fix a problem with the DNS relay crashing ... One other problem I had with the UK firmware was when I enabled port ... This appeared to work fine until we had a power cut. ...
    (uk.comp.sys.mac)