Firewall Cisco Pix 515 Question.
Date: Tue, 26 Oct 2004 12:15:50 -0300
Hi all, i need your help guys, i have a cisco pix 515 and i don't know who
to add a new subnet.
Well, my actual subnet (248) is full and i added another (248 too). After
some configurations i got see a new ip from the lan, but not from the
Actual Subnet: gateway 192.168.1.1 ---> ips from 192.168.1.2 to 192.168.1.6
The new subnet: gateway 192.168.5.15 ---->ips from 192.168.5.16 to
What i haven't done? Please help me.
- Re: 2 public IP into Cisco 501
... Martin Bilgrav wrote: ... My office have a Cisco pix 501. ... hints and tip would kindly appreciated. ... Are the IP's on the same subnet as the current outside IP? ...
- Firewalls that log layer 2 network activites.
... (ie MAC addresses for local devices on the same subnet) ... Cisco PIX ...
- Re: TCPIP - Ping tool
... Strangely enough the answer was under your nose all along, namely PING. ... If your "internal network" corresponds to a Local Area Network (LAN), ... assume the subnet address for your LAN is 192.168.10.0 and the subnet mask ...
- Re: Detecting host in the local network
... LAN. ... To send a frame to host at the other IP network you must send to ... router, if they're willing to respond to the ping and the router allows ARP ... address you specify for any sort of IP traffic is not on your local subnet ...
- Re: VPN Gateway
... Your setup can only work by using the VPN server as a proxy for the remote. ... Gateway: ... With this configuration i can't ping any of my Lan ip's. ... the same IP subnet as your LAN machines. ...