Re: Zone Alarm -- Free Version -- Internet Connection (ICS) Setup

From: ápuk (reply2group)
Date: 08/22/04 

Date: Sun, 22 Aug 2004 18:43:33 +0100

"Pie" <curious314159@yahoo.com> wrote in message
news:37b46596.0408202134.396c55e2@posting.google.com...
>I am running ZA Free version, completely confused on what
> IP's to specify at Firewall--Zones Section to get the
> Internet Connection (ICS) setup in my home Wireless network.
>

this is how i was able to setup ICS with ZoneAlarm running on a winXP host
and a win2k PC as the client...
give the host a static IP of 192.168.0.1 w/default subnet mask
then goto ZA advanced menu and set the option 'this computer is an ICS
gateway' (or something like that)
then goto the client PC and under TCP/IP select 'obtain an IP automatically'
then goto ZA on the client, advanced section, select the 'use gateway...'
option
i think this is right however its from memory...
i have had to uninstall ZA off my client since I installed SP2 or it freezes
my PC up when using certain programs !?!?

good luck,
AP

Relevant Pages

  • RE: ICS clients cannot connect
    ... I've got this from the ICS host: ... I turned off ICS host and then enabled it. ... the client and entered "ipconfig /release". ... goto one of the client machines and do the same, ...
    (microsoft.public.windowsxp.general)
  • Re: ICS on small home network no longer works for http traffic
    ... 1) If you're using MS ICS or Windows ... After installed a new router or cable modem replacing dial-up to access ... the Internet, you can't access some web sites. ... The client PC can ping to a outside IP, or a name and DNS> resolves the name ok. ...
    (microsoft.public.windowsxp.network_web)
  • Re: ICS setup problem
    ... may be idiosyncratic when the ICS is being implemented rather than ... Alarm though shows nothing getting through from the Internet. ... >>that contains the name of the dial up client and path to the server! ... >>connection on the server through the dial up gateway...incoming and ...
    (microsoft.public.windowsxp.network_web)
  • RE: ICS clients cannot connect
    ... Try going to a client machine and inputing the address manually ... Start / Controll Panel / Network ... DHCP should not be turned on on the master, just on the clients as ICS has a DHCP Server built into it. ...
    (microsoft.public.windowsxp.general)
  • Re: Just cannot connect via ICS
    ... >I setup an xp PC yesterday, which connected to the web via ICS perfectly. ... >I can ping the ICS PC, traceroute to any website i please as well as nslookup. ... >for ip and enter the dns servers. ... Options | Connections | LAN Settings. ...
    (microsoft.public.windowsxp.general)