Re: PIX 515 reloading by itself

From: LM (lm_NOSPAM_at_yahoo.com)
Date: 08/15/04

  • Next message: Richard: "Re: Zone Alarm Download Problems" 
    Date: Sun, 15 Aug 2004 19:37:59 +1000

    thanks for the info... I did "crashinfo save enable" in conf mode..
    and observed the box via console for a couple of days.. not on a
    single did I get a crashinfo after the spontaneous reload.. was that
    that command I needed to get the PIX to dump the crashinfo??

    Thanks,
    Lei

    On 13 Aug 2004 11:24:39 -0700, answanso@cisco.com (Anthony Swanson)
    wrote:

    >Type Show Crashinfo in priv mode and see if there is any output. You
    >should get something like this:
    >
    >Traceback:
    >0: 00338b55
    >1: 00338c1b
    >2: 00108a24
    >3: 001077ec
    >4: 00107a93
    >5: 001036dd
    >6: 00000000
    >
    >followed by more information. Capture it and send it to me in a text
    >file.
    >
    >Thanks
    >Anthony
    >
    >LM <lm_NOSPAM@yahoo.com> wrote in message news:<q69oh09cdj58ts2mofn7jusdl71h4qk8hm@4ax.com>...
    >> Hi,
    >>
    >> I've got a PIX 515 that has recently started reloading itself for
    >> apparently no reason. At time it was running 6.3(3) and I have since
    >> upgraded it to 6.3(4). It is operating standalone. I had the console
    >> connected while it reloaded and there was absolutely no error
    >> messages of any description. The only odd thing that I notice about
    >> the box is that there is a red light coming from what appears to be
    >> an LED labelled "CR1" located on the main board. next to the battery.
    >> I do not recall that it was like that before... but can't be sure.
    >>
    >> Following is the "show ver" from the PIX.. could someone help and
    >> provide some hints as to why the box might be reloading by itself?
    >> btw, the fan is operating normally.
    >>
    >> many thanks,
    >> Lei
    >>
    >> PIX(config)# show ver
    >>
    >> Cisco PIX Firewall Version 6.3(4)
    >> Cisco PIX Device Manager Version 3.0(1)
    >>
    >> Compiled on Fri 02-Jul-04 00:07 by morlee
    >>
    >> PIX up 24 mins 44 secs
    >>
    >> Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
    >> Flash i28F640J5 @ 0x300, 16MB
    >> BIOS Flash AT29C257 @ 0xfffd8000, 32KB
    >>
    >> 0: ethernet0: address is 0050.54ff.2039, irq 10
    >> 1: ethernet1: address is 0050.54ff.203a, irq 7
    >> 2: ethernet2: address is 00e0.b604.eda7, irq 9
    >> 3: ethernet3: address is 00e0.b604.eda6, irq 9
    >> 4: ethernet4: address is 00e0.b604.eda5, irq 9
    >> 5: ethernet5: address is 00e0.b604.eda4, irq 9
    >> Licensed Features:
    >> Failover: Enabled
    >> VPN-DES: Enabled
    >> VPN-3DES-AES: Disabled
    >> Maximum Physical Interfaces: 6
    >> Maximum Interfaces: 10
    >> Cut-through Proxy: Enabled
    >> Guards: Enabled
    >> URL-filtering: Enabled
    >> Inside Hosts: Unlimited
    >> Throughput: Unlimited
    >> IKE peers: Unlimited
    >>
    >> This PIX has an Unrestricted (UR) license.

  • Next message: Richard: "Re: Zone Alarm Download Problems"

    Relevant Pages

    • Re: PIX 515 reloading by itself
      ... The field notice states that that will fail to power on, ... Other PIX models and PIX-515 models with DC ... >> provide some hints as to why the box might be reloading by itself? ... >> btw, ...
      (comp.security.firewalls)
    • PIX 515 reloading by itself
      ... Following is the "show ver" from the PIX.. ... provide some hints as to why the box might be reloading by itself? ... Cisco PIX Device Manager Version 3.0 ... Licensed Features: ...
      (comp.security.firewalls)
    • Re: PIX 515 reloading by itself
      ... The first time when this happened, this PIX was connectecd to the ... it is still reloading on its own, ...
      (comp.security.firewalls)