Re: $100 to first person to provide details on connecting Safenet client VPN on NAT subnet to DFL-300

From: Jterry (Jterry.18dn2e_at_mail.webservertalk.com)
Date: 06/25/04

  • Next message: Mimic: "Re: NEWS-REGISTER@INDIVIDUAL.NET" 
    Date: Thu, 24 Jun 2004 22:14:51 GMT

    Did you ever get this issue resolved?

    I use a Cisco 678 for DSL and connect through a DFL-300 to Microsoft
    VPN. Would this solve your issue?

    Joe Terry

    defilm wrote:
    > *Easy $100, paid anyway you want... Paypal, etc. If you can simply
    > state how you were able to get your clients to connect using SafeNet
    > IPSEC client via IPSEC VPN to your DFL-300.
    >
    > Very common scenario:
    >
    > User works from home behind a simple NAT/SPI firewall device (one of
    > the hundreds that support IPSEC passthru, most do), and has IKE UDP
    > port 500 forwarding to the users PC running SAFENET IPSEC client.
    >
    > user makes an IPSEC VPN connection to a RFC 1928 Private IP behind
    > the
    > DFL-300.
    >
    > That is it. (Please note, all DLINK documentation "assumes the
    > client
    > has a Internet addressable IP address" not a NAT address. This is
    > the
    > case for their SAFENET IPSEC knowledgebase article, and their MS
    > WIN2K/XP IPSEC solution.
    >
    > Mark J. DeFilippis
    > defilm@acm.org
    >
    > I have a few of these DFL-300 door-stops and will gladly pay the
    > $100
    > and take the egg on my face!
    >
    > For validity... my contact number, but please use email...
    > 1-212-632-1928 * 

    --
Jterry
------------------------------------------------------------------------
Posted via http://www.webservertalk.com
------------------------------------------------------------------------
View this thread: http://www.webservertalk.com/message164884.html
  • Next message: Mimic: "Re: NEWS-REGISTER@INDIVIDUAL.NET"

    Relevant Pages
    Loading