WatchGuard and VPN client software

From: Duane Arnold (notme_at_notme.com)
Date: 06/04/04 

Date: Fri, 04 Jun 2004 17:01:29 GMT

Well,

VPN to work didn't work. I talked to Admin.

He gave me a series of UDP port numbers, IP 50 and IP xxx.xxx.xxx.xxx to
connect to the VPN server from the WG.

I went to Custom Service on WG Admin screen.

I assume I am to create a custom service.

1) enter the UDP port numbers
2) Incoming filter ANY and set the Host IP
3) Outgoing filter ANY and set the Host IP

I am not to sure about the job's VPN IP xxx.xxx.xxx.xxx as I want to
limit it to that IP.

Is 1-3 correct above as to what I am suppose to do?
 
Duane :)

Relevant Pages

  • Re: Security: VPN or RWW
    ... There is also an inherent flaw in 'port limited VPN', most people would want 'Windows File Sharing' to work, there goes a big hole that many viri use for vector. ... For all its current problems, it's possible to use it pretty well continuously without logging on as an admin, which I've never been able to do with XP. ... When all the network resources are concentrated in the server, either really or virtually, then nobody needs network browsing, nobody needs to have the same 'view' of the network locally and remotely. ... Whatever kind of encrypted remote link is used, connects from a single application at the remote end, not from the machine as a whole. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN authentication erratic and times out
    ... should be changed on the VPN client or host. ... VPN connection is disconnected after several minutesVPN connection is disconnected after several minutes. ... behind the router, but the VPN connection was lost about 3 minutes later. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: VPN: Can connect but not browse or do anything
    ... I've got a VPN set up. ... to my knowledge -- I had to put the host ... Beyond connecting, however, I can't do much. ... All computers belong to the same workgroup. ...
    (microsoft.public.windowsxp.network_web)
  • VPN Pass-through not working on D-Link DI-524
    ... I have a problem with VPN through a DI-524. ... I connect to the VPN Host & test ... Their position is the router works for VPN ... Router configuration is as follows: ...
    (microsoft.public.windows.server.networking)
  • VPN Pass-through on DI-524 not working
    ... I have a problem with VPN through a DI-524. ... I connect to the VPN Host & test ... Their position is the router works for VPN ... Router configuration is as follows: ...
    (microsoft.public.windowsxp.work_remotely)