Re: Cisco PIX or GN-1000

From: paul blitz (paul.blitz_at_centia.co.uk)
Date: 12/22/03 

Date: Mon, 22 Dec 2003 10:08:39 -0000

The Pix is indeed a powerful box, but beware that setting it up is NOT at
all obvious, needing everything to be done from a command line.

The PIX Os is NOT Cisco IOS. Expect a steep lurning curve! For help, go to
comp.dcom.sys.cisco

paul

"zeni" <hp@columbusdirect.com> wrote in message
news:636f59c.0312150432.3cb7350d@posting.google.com...
> Hi
>
> I currently have a GB-1000 from GTA as my firewall, due to increasing
> support costs etc I am looking to change from GB-1000 and get a Cisco
> PIX 501 instead. Are these better?

Relevant Pages

  • RE: PIX
    ... >In config mode, type 'description' followed by your remarks. ... PIX OS does not have a "description" field as is in Cisco IOS on Interfaces. ...
    (Security-Basics)
  • Re: [fw-wiz] Decrypted VPN traffic and access lists on outside interface of PIX
    ... > access list that is applied to the outside interface of a PIX? ... I do not know anything about pix! ... one would share a single ACL! ... pix ACL are very similar to cisco IOS ones). ...
    (Firewall-Wizards)
  • Re: Cisco PIX firewall is software or hardware?
    ... >> The firmware it runs is Cisco IOS. ... >The PIX does NOT run Cisco IOS! ... It runs something called Finesse. ...
    (comp.security.firewalls)
  • internet ip to local ip with pix
    ... pix inside 10.112.2.241 ... Is 10.2.2.2 inside or outside the network? ... You would need a 'static' command, and you would need a 'route' ... to the outside interface by using the access-group command. ...
    (comp.dcom.sys.cisco)
  • Re: traceroute from UNIX to PIX-515e not working
    ... The PIX Firewall does not support the initiation of the traceroute ... command as it is not part of the PIX command set. ... it can be configured to allow traceroute through it. ... hops that send Internet Control Message Protocol (ICMP) error messages, ...
    (comp.dcom.sys.cisco)
Quantcast